User's Manual

POWER SOURCE
1. Insert the plug from the supplied AC/DC Adapter to the DC In Jack on the rear of unit.
2. Insert the small plug from the supplied Adapter to the AC In Jack on the AC/DC
Adapter.
3. Insert the Adapter Plug from the supplied to the wall outlet having AC100-240V~;
50/60Hz.
NOTE: If Long period of time will not use the unit, unplug the Adapter Cord from
the wall outlet.
INSTALLATION
1.The unit can be disassembled into two parts as the figure below:
2.The unit can be re-assembled as the figure below:
PLACING
1. Placing on the table
When placing the Sound Bar and Subwoofer on an entertainment center, bookshelf, or
any type of enclosed space, be sure to allow at least 2-3 inches of space around them for
ventilation. If they are enclosed in a tight space without ventilation, heat generated from
them could produce a potential heat hazard.