User's Manual

EFFECTIVE DISTANCE OF REMOTE TRANSMITTER
NOTES:
--when there is an obstacle between the unit and the transmitter may not operate.
--when direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light
shines on the REMOTE SENSOR of the unit, the remote operation may be unstable.
GENERAL OPERATION
1. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as the
previous procedure. The red indicator will light but unit is OFF and in standby mode.
2. Press the Standby/Source button on the unit or press the
button on the remote
control to power on the unit from standby mode. Press the (SUBWOOFER)
button on the remote control to power on the wireless Subwoofer. The Indicator on
wireless Subwoofer will blink, after a few seconds, the unit will be connected with the
wireless Subwoofer automatically and the Indicator on wireless Subwoofer will stay lit.
3. Press the Standby/Source button on the unit or press the SOURCE button on the
remote control repe atedly to switch to desired mode. T he color of Indicator on the unit
will turn to:
Blue--------------------------------------------------------------- Bluetooth
Green-------------------------------------------------------------FM Radio
Violet------------------------------------------------------------------AUX 1
Orange----------------------------------------------------------------AUX 2
Cyan---------------------------------------------------------------Optical In
4. During Playback:
~ Press the VOL ( Volume ) + or - buttons on the unit or remote control to adjust volume
level as desired.
~Pressthe
( Mute ) button on remote control to turn off the sound. Press again to
resume.
~ Press the BASS +/- buttons on remote control to adjust the sound level of bass.
~ Press the TREBLE +/- buttons on remote control to adjust the sound level of treble.
5. When finished listening, press and hold the POWER/SOURCE button on the unit or
press the SOURCE button on remote control to power off ( Standby Mode ) the unit.
6. If the unit will not be used for long period of time, unplug the AC/DC Adapter from the
unit and wireless Subwoofer from the wall outlet.
NOTE:
If there is no signal received, the Blue Indicator of the wireless Subwoofer
will blink. If there is signal received, the Blue Indicator of the wireless Subwoofer
will stay lit.