User's Manual

Table Of Contents

1. Connect the Sound Bar to the power as previous procedures.

2. Press the

LISTEN TO FM RADIO

FM Antenna

and extend the wire or relocate the wire to improve the radio reception.

The Antenna wire on the top of the unit is for radio reception. If reception is weak, unwind

4. During Playback:

~ Press the VOL ( Volume ) + or - buttons to adjust volume level as desired.

~ Press the EQ button repeatedly to select and set equalizer mode as desired.

~ Press the ( Mute ) button to turn off the sound. Press again to resume.

GENERAL OPERATIONS

1. Connect the AC/DC adapter to the unit and wall outlet as the previous procedure. The Red

6. If long period of time will not use the unit, unplug the AC/DC Adaptor from the wall outlet.

3. Press the POWER/SOURCE button on the unit or press SOURCE button on the remote control

~ Press the BASS +/- buttons to adjust the sound level of bass.

~ Press the TREBLE +/- buttons to adjust the sound level of treble.

( Standby mode ) the unit.

repeatedly to switch to desired mode, the color of the Indicator will turn to:

2. Press the POWER/SOURCE button on the unit or press the Power button on the remote

button on the remote control to power off

5. When finished listening, press and hold the POWER/SOURCE button on the unit or press the

POWER/SOURCE button on the unit or the button on the remote control

to power on the unit.

Press and hold the TUNE -/ or TUNE +/ buttons until the Indicator start blinking

3. Press the POWER/SOURCE button on unit or press the SOURCE button on the

remote control repeatedly until the color of the Indicator turns to Purple.

Press and release the TUNE - / or TUNE + / buttons repeatedly to fine tune.

Indicator will light.

Purple------------------------------------------------------------FM Radio

AUX IN 1

Yellow----------------------------------------------------------- AUX IN 2

Blue--------------------------------------------------------------- Bluetooh

to search and plays the searched available FM station.

6. If the available FM station is stereo, the unit will play it in stereo mode automatically.

If the reception is no good, press the MO/ST button on the remote control to switch it

to Mono mode. Press again to turn back to Stereo mode.

control to power on the unit from standby mode. The color of the Indicator will turn to

correspondence color.

Green------------------------------------------------------------

(To reset the EQ to normal mode; power off the unit then power on again)

Cyan---------------------------------------------------------------- Optical