User's Manual

Check the followings before requesting service
SYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION
TROUBLESHOOTING GUIDE
No power
No sound
Sound distortion
Remote not
working
Bluetooth
reception failure
Have not paired
The external device is far from
the unit
The battery
is consumed
Volume level too high
Bass level of the connected
device too high
Input source incorrect
The paired/connected device
is not in payback mode
Volume in minimum position
The unit is in Standby mode
Connect the power AC/DC adapter.
Press the button to turn on the unit.
Raise volume level by pressing the VOL
(Volume) + button.
Play music/movie in the paired/connected
device as usual
and make sure the
volume level of it is in high level.
Reduce the bass level of the connected
device.
VOL (Volume ) - button.
Reduce the volume level by pressing
the
Replace with new battery.
Put the external BT device close to the
unit.
Power AC/DC adapter
not connected
12
Press the BASS - button on the
Sound Bar to reduce bass level.
Poor FM reception
Relocate and unwind the FM antenna wire.
Reduce the volume level of the paired/
connected device.
Pair the unit with the BT Device as the
procedures on page 9.
Press the POWER/SOURCE button on the
unit or press SOURCE on the remote
control repeatedly to set the input source
to the desired mode.