User Manual

TIME SET OR RESET:
1. Connect the unit to the power as previous procedures. The LCD Display will
turn on.
2. Make sure the unit is in Standby mode, then press and hold the CLOCK button
on the remote control. The digit of hour will blink.
3. Press the or button repeatedly to set hour . ( Make sure PM indicator appear on
the display if the time is PM and not appear if the time is AM ).
4. Press the CLOCK button again, the digit of minute will blink.
5. Press the or button to set minute.
6. When finished, press the CLOCK button again to save the settings and exit.
SLEE TIMER:
PPPPPPPPP
8
GENERAL OPERATIONS
In power on mode, press the SLEEP button on the remote control repeatedly
to activate and set the sleep time of the sleep timer.
" " will appear on the display.
To turn off the Sleep Timer before times up,
press the SLEEP button repeatedly to reset
the sleep time to "OFF".