CONVERTIBLE SPEAKER SYSTEM Owner's Manual PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model: CHT914c Size: 148.
IMPORTANT SAFETY INSTRUCTIONS This unit has a long AC cord and other long cord that can easily be tripped on or pulled on, causing injury. Please make sure it is arranged so it will not drape over a laptop, etc. Where it can be pulled on by children or tripped over accidentally.
INSTALLATION This unit can be assembled as the following methods: Method 1: Assemble the main unit and L Speaker together : 1 2 3 4 Main Unit Left Speaker Supplied Wooden Stand Left Speaker Lock the Hook on the rear of left speaker to the Main unit as Fig. 4 Supplied Metallic Screws and Washers Note: We supplied total two Wooden Stands and 4 sets Metallic Screws/Washers.Keep the excess accessories in this assembly method for future use.
The speaker net can be take out and reassembly as the Figure below: After above installation, connect the connection wires (Red and Black) from L Speaker to the Speaker Connectors on the rear of Main Unit as the figure below: Black wire + + Main Unit SPEAKER ANT Red wire OFF L R AUX IN 1 ON POWER AC 120V~ 60Hz 4 Left Speaker
LOCATION OF CONTROLS MAIN UNIT 1. Indicator INDICATOR AUX IN 2 EQ SOURCE VOL- VOL+ TUNE- TUNE+ 2. AUX IN 2 jack POWER 1 2 3 3. Remote Sensor 4. VOL+ (Volume Up) button 5. INDICATOR AUX IN 2 11 EQ SOURCE VOL- VOL+ TUNE- TUNE+ 10 9 8 7 6 / TUNE + button 4 6. VOL- (Volume Down) button 5 7. TUNE - button 8. (Play/Pause) button 9. SOURCE button 10. (Power) button 11.
LOCATION OF CONTROLS REMOTE CONTROL 4 5 1 6 2 7 3 8 1. POWER button 2. /TUNE - button 3. VOL (Volume)+/- buttons 4. SOURCE button 5. (Mute) button 6. / TUNE+ button 7. (Play/Pause) button 8.
BATTERY INSTALLATION--- REMOTE CONTROL -First Time Use Remove and discard the insulation tab from the battery tray as figure on the right. -Replacing Batteries For Remote Control 1. Push and slide out the battery holder as figure 1 below. 2. Replace the battery with a new CR2025 button cell as the polarity markings on the rear of the Remote Control. 3. Close the battery holder. Fig.1 Fig.2 Fig.3 %$77(5< 35(&$87,216 .
POWER SOURCE Insert the AC plug into a conveniently located AC outlet having AC 120V~ ; 60Hz. NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of electric shock. If the AC plug dose not fit into a non polarized AC outlet, do not file or cut the wide blade. It is the user's responsibility to have an electrician replacing the obsolete outlet. GENERAL OPERATIONS 1. Insert the plug from AC Power Cord into AC wall outlet having AC 120V~ ; 60Hz. 2.
LISTEN TO FM RADIO 1. Power ON the unit as previous procedures. 2. Press the SOURCE button repeatedly until the color of Indicator changes to Green. 3. Press and hold the /TUNE - or /TUNE + buttons until the indicator starts blinking. The unit will start to search next (or previous) available FM radio station then plays. 4. Repeat the same procedures until the desired radio station is received. NOTE: If the received FM station is in stereo mode, the unit will play it in stereo mode automatically.
LISTEN TO EXTERNAL AUDIO DEVICES INDICATOR AUX IN 2 AUX IN 2 jack EQ SOURCE VOL- VOL+ TUNE- TUNE+ INDICATOR AUX IN 2 INDICATOR AUX IN 2 EQ SOURCE VOL- VOL+ TUNE- TUNE+ 1. Connect one end of supplied audio connection cable to the AUX IN 2 jack on the top of the unit as the figure above. 2. Connect the other end to the Audio out/Line out/Phone jack on the external player (such like iPod, iPhone, iPad, MP3 Player, Discman... etc.). 3. Power ON the unit as previous procedures. 4.
BLUETOOTH PARING AND PLAYBACK 1. Power ON the unit as previous procedures. 2. Press the SOURCE button on the unit or remote control until the indicator changes to Blue. 3. Turn on the BT function on the external BT device and play the music as usual. (Make sure the volume level of the external BT device is set to high level). 4. During palyback: Press the VOL (Volume) +/- buttons to adjust volume level. Press the / TUNE- or / TUNE + button to skip track. Press the (Play/Pause) button to pause.
TROUBLESHOOTING GUIDE &KHFN WKH IROORZLQJV EHIRUH UHTXHVWLQJ VHUYLFH 6<03720 3266,%/( &$86( 3266,%/( 628/7,21 No power AC plug not connected to the wall outlet Plug to the wall outlet.
GENERAL SPECIFICATIONS Power Source.......................................................................................................... AC 120V ~60Hz Power Consumption...................................................................................................................45W Radio Coverage ...............................................................................................FM 87.5 -108.0 MH z Impedance of Speakers: Loud Speakers......................................................
LIMITED WARRANTY Craig warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 90 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $15.00 (to cover shipping and handling costs) payable to Craig Electronics Inc.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
