User's Manual

Troubleshooting
Noisy sound:
Radio:
Turntable:
Not playing or sound distortion
The Function selector is in wrong position, turn it to PHONO/AUX position.
Rising the volume level by turn the VOLUME knob clockwise.
Loosen the screw, and take out the stylus guard.
(The stylus guard is a white plastic cover that protects the stylus
during transportation.)
Select the correct playback speed.
The unit is too close to a TV set or similar appliances.
Relocate the unit.
Check the connection of AC wall outlet.
Can not listen to any station, or signal is too weak.
If you experience any problems with the unit, please take a
monent to look through this chart and see if you can solve the
problem yourself before you call your dealer.
Maintenance:
Always keep the turntable clean.
If the surface of the unit gets dirty, wipe with a soft cloth or use a diluted mild liquid soap.
Be sure to remove any excess
liquid completely. Do not use thinner, benzine or alcohol as they may damage the surface
of the unit. Allow the surface
of the unit to dry completely before using.
No power:
No sound:
Bluetooth:
Bluetooth reception failure
The external device is too far from the unit.
Have not paired.(Pair the unit as the procedure stated in manual).
Tune the station properly.
The function selector is in wrong position, turn it to AM or FM position.
Relocate the unit.
13
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.