4-IN-1 RETRO TURNTABLE SYSTEM WITH BLUETOOTH WIRELESS TECHNOLOGY Owner's Manual PLEASE READ BEFORE OPERATING THIS EQUIPMENT. MODEL:CD695 Size: 148.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT R EMOVE COVER (OR BACK). NO USER-SERVICEABLE PART S I NSIDE . R EFER SERVICING T O Q UALIFIED S ERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1) Read these instructions. All the safety and operating instructions should be read before the product is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference.
IMPORTANT SAFETY INSTRUCTIONS 17) Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 18) Object and liquid entry Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
Power Source Insert the AC/DC Adapter power plug into a conveniently located AC outlet having AC 120-240V~,50/60Hz. AC outlet AC/DC Adapter To the DC IN jack of the rear of the unit. Open/close the turntable cover 1. Lift the turntable cover. 2. Pull the arms to front to lock it as the figure on left. 1. Lift the cover. 2. Push the arms to backward to release the lock. 3. Close the cover.
Location of Controls Turntable B Before use, take out the stylus guard ( white plastic cover ) by pull it out. C D E A F A turntable B 45 RPM adapter C cue-lever D tone arm holder E speed selector F tone arm Front View 1. Speaker O PH NO/AUX FM A 3. Tuning knob M B 2. Function Knob T 4. Volume Knob VOLUME 5. Indicator 1 2 3 4 5 1 Rear View 6. Antenna R L ANT 7. AUX Jack DC IN 6 9. DC IN Jack LINE OUT AUX 7 8.
T O PH NO/AUX FM A M B Listening through Bluetooth VOLUME 1. Turn the VOLUME Knob clockwise until a sound "click" is heard to turn on the unit, the indicator will light up. VOLUME T O PH NO/AUX FM A M B 2. Turn the function selector to the "BT" position, the indicator will light up Blue and blink fastly, now it is ready for pairing. 3. Activate the Bluetooth function in your player(e.g. Mobile phone) and try to sear and pair. 4.
Listening to a Record T O PH NO/AUX FM A M B 45 RPM Adapter VOLUME NOTE: Before use, take out the stylus guard(white plastic cover). Before use, make sure there is no 3.5mm audio cable plugged in the AUX jack on rear of the unit. 4. Select the speed. 33 45 1. Turn the VOLUME Knob clockwise until a sound "click" is heard to turn on the unit, the indicator will light up. 78 5. Put the record on the turntable.
10. Turn the volume knob to adjust the volume level. 7. Raise the leve to lift the tone arm as the figure below. tone arm VOLUME lever 8. Move the tone arm to the top of the record. The turntable will start to run. 11. When finished listening, replace the tone arm to the arest and lock it as previous procedure. Turn the VOLUME Knob counterclockwise until a "click"sound is heard to power off the unit. 9. Place the tone arm to the desired point on the record by turning the lever as the figure below.
Listening to the Radio 1. Turn the VOLUME Knob clockwise until a sound "click" is heard to turn on the unit, the indicator will light up. 4. Turn the VOLUME Knob to adjust the volume level. VOLUME VOLUME 5. When finished listening, turn the VOLUME Knob counterclockwise until a sound "click" is heard to power off the unit. T O PH NO/AUX FM A M B 2. Turn the function selector to the "FM" or "AM" position.
Other Connections AUX IN: LINE OUT: 1. Connected the external audio device to the unit by an audio connection cable with 3.5mm stereo mini jacks as: 1. Connected the external audio device to the unit by a cable with RCA plugs ( cable not included ) as: ~ Insert one end to the Line IN or AUX IN jacks on the external audio Amplifier. ~ Insert the other end to the LINE OUT jacks on the rear of unit. ~ Insert one end to the Phone; Line Out or AUX Out Jack on the external audio device.
Records Handling How to replace the stylus Replace the stylus 1. Use a screwdriver to push the stylus off then pull it out as the figures below: 2.
Troubleshooting If you experience any problems with the unit, please take a monent to look through this chart and see if you can solve the problem yourself before you call your dealer. No power: Check the connection of AC wall outlet. No sound: Rising the volume level by turn the VOLUME knob clockwise. Noisy sound: The unit is too close to a TV set or similar appliances. Relocate the unit. Radio: Can not listen to any station, or signal is too weak. Tune the station properly.
Specifications General: Power requirements..........................................................................................................................AC 120-240V~,50/60Hz Power Consumption......................................................................................................................................................13W Audio: Impedance of speakers...............................................................................................................................
