User's Manual

General Operation:
OPERATIONS:
7
1.
Recharged the built in
battery as previously instructed.
2.
Press the Power ON/OFF Switch to ON position on the right of unit to turn
the unit to standby mode.
The POWER Indicator on the top of unit will
illuminate.
3.
Press and hold the /MODE Button on the top of unit approximated 1
second until “ON” appear on the LED
Display to turn on the unit from
standby mode. The LED Display will illuminate.
4.
Press the /MODE Button repeatedly to switch to desired playback mode.
The correspondent indicator will
appear
on the display with
your selection (see list below):
Playback Mode: Indicators:
BT (Bluetooth)
“bt” will appear on the display
USB (If USB Device inserted) “USb” will appear on display
Radio FM Band
Radio frequency “XX.X” or “XXX.X”
will appear on the display
A
UX IN “AUX” will appear on the display
5.
During playback,
A. Turn the Volume Control Knob on the top of unit to adjust volume
level as desired.
B. Press the LIGHT Button repeatedly to
change the blinking mode of
the Decorative
LED Lights
C. Press the BATTERY METER
to read the power of the built-in battery.
6.
When finished listening, press the /MODE Button to turn the unit to
Standby Mode.
7.
If you will not use the unit for an extended period of time, power off the unit
by press the Power ON/OFF
Switch
to OFF position. The POWER
Indicator will not light.
IMPORTANT:
The unit is for Water and Dusts Ingress Protective; always make sure all
the covers were completely
closed
tightly and firmly.
ON/OFF
turn
o
r
.
B
u
t
t
o
n