User's Manual

WP35
Professional LED Photographic Light
User Manual
Thank you for using VILTROX fill light
CCT Mode
HSL Mode
Please read this manual carefully
In order to be able to understand and use the full
function of the fill light
Main Features Operation Description
Bluetooth connection
Tips:
Before Use
1.Fix the U-shaped bracket on
the stand
2.Rotate the knob to install the fill light
on the light stand, and then tighten and
rotate as shown in the picture
(Note: Two lithium batteries must be installed
for the fill light to work)
High color rendering index bi-color LED lamp beads.
Dual power supply system, powered by lithium battery or DC power supply.
A variety of dimming methods, host control / mobile APP control / RC-11
remote control (sold separately).
Dot matrix LCD screen, display more intuitive.
Parts Identification
Function key1
channel number
Group number
Function key2
Function key3
Soft diffuser
Barndoor
Bracket lock
U-type bracket
Battery compartment
Battery release button
Power switch
Bluetooth button
LCD display screen
DC power port
CCT Mode
HSL Mode
COL Mode
FX Mode
RGB Mode
HSL
DIM
HUE
SAT 0-100
359
RGBWY Mode
RGBWY
R: 0
G: 0 Y: 0
B: 0
W: 0
COL Mode
COL
E002
ROSCO
LEE
HOC
26%
E007
E008
E036
FX Mode
Caution：
CH
GR
VER
14
A
1.0
WP35
2800 6800k
~
Max.luminous
Max. luminous flux 3200Lux@0.5m
3000Lm，100/m
648PCS
30W
1158.5g
Ra≥95，TLCI ≥97
DC Power port 5.5X2.5mm
7.4V×2
275×55×210mm
0-100%
(1)Lithium battery: According to the
lithium battery model marked on
the fill light, fix the lithium battery.
(2)DC power supply: Select the correct
power adapter according to the power
supply specifications shown on the fill
light. After connecting the power
adapter, plug in the power according
to the mark on the fill light.
WP35 is a professional photography fill light with selected high CRI lamp beads
and preferred RGB, low power consumption, stable color temperature, and the
ratio of color temperature and brightness can be adjusted arbitrarily. It is easy to
carry and suitable for shooting in various scenes, and can meet your shooting
needs of more scenes.
Power adjustment: turn left and right (function key 1) to add
and subtract items. Press (function key 1) to increase power
by 25% each time it is pressed.
Color temperature adjustment: turn left and right (function
key 2) to add or subtract items. Press (function key 2) to
increase the color temperature by 800k each time it is
pressed.
R/G: turn left and right (function key 3) turn left to increase
the red light, Turn right to increase the green light.
Power adjustment: turn left and right (function key 1) to add
and subtract items. Press (function key 1) to increase power
by 25% each time it is pressed.
Color adjustment: turn left and right (function key 2) to add
or subtract items. Press (function key 2) to increment by 60
each time it is pressed.
Saturation: turn left and right (function key 3) ，then turn right
to increase light saturation.
Item switching: turn left and right (function key 2) to
switch items.
Turn (Function key 3) to switch the value under this item.
Function key 1:Adjust the power in this mode
Function key 2: Adjust color card function
Function key 3: Adjust the items under the color card
Function key 1:Adjust the power in this mode
Function key 2: Adjustment item
Function key 3: adjust the speed of light under this function
Long press (Bluetooth button) to enter Bluetooth mode, then
press(Function key 2) to adjust the channel, (Function key 3)
to adjust the group number.
Remote Control
APP Operation
Attention
Specifications
Battery
power
Brightness
Color
temperature
Long press -
power switch
Long press - parameter
plus / minus in multiple
Short press - parameter
plus / minus
Short press
- switches of all
light in the
current channel
Channel
Grouping
LCD display
screen
Channel setting
Group setting
Dimming mode
The channel and group of the light should be
consistent with the mobile bluetooth APP.
Long press
- channel setting
Short press
- group setting
Long press -
"mode" switch
Short press -
"project" switch
AAA battery compartment
1.Long press RC-11 "power switch" for 2 seconds, waiting for the power turning on and the
display screen being on.
2.Refer to the “controlled photographic light” and set it to the same "channel" and "group".
(different "channel" or the "group" from the remote control and the light cannot be
operated the LED photography light )
Channel setting - long press CH / GRP key for 2 seconds, press + / - key to select the required
channel, then press "mode" again to confirm,
Group setting - short press "CH / GRP" key, you can choose A/B/C/D/E/F.
3.Long press "MODE" to switch one of four mode of CCT / HSL / RGBW / SCENE. HSL /
RGBW/SCENE are RGB color mode, but some of product models may not support these
three modes. Please use it in CCT mode.
4.Press + / - to adjust the power / color temperature . Press "MODE" You can switch between
power / color temperature and other options.
5.After RC-11 is powered on, the power supply will shut down automatically after 30
minutes of inactivity.
If RC-11 remote controller is not being used for a long time, please take off the battery and
save it separately to avoid damage to components due to battery leakage.
1. After keeping the Bluetooth of the mobile phone on, open the mobile APP "Weeylite
Pro" and set the same channel number of the APP as the controlled light, and the group
number is also set to the same as the controlled light. (If the channel number of the
controlled light is 1, the channel number of the mobile phone APP is also 1, and the group
number of the controlled light is A, the mobile phone APP also needs to be A. If the
parameters are inconsistent, it can't be controlled).
1. Two batteries should be charged at the same time to keep the power balance.
2. Do not mix old and new batteries with different types; Please remove the battery when
it's not used for a long time to prevent battery leakage.
3. Please keep dry and do not immerse the product in water or expose it to rain.
4. This product can not waterproof, please pay attention to waterproof in rainy days and
humid environment.
5. Keep out of reach of children.
6. Do not use in flammable gas, violation of this warning may cause explosion or fire.
7. Please use a special charger for charging, and install the operation instructions
correctly, and use in the specified voltage and temperature range.
8. It is forbidden to place it on the bed, sofa and other places which will affect heat
dissipation or have more combustible materials. The machine will generate heat in the
process of use, which will cause fire danger if it is flammable in close contact.
9 It is normal that the temperature of the machine is (about 60C) high during use.
when shooting with multiple lights, do not change the channel setting after fixing the
channel. Please set different lights into different "groups", such as group A for light A and
group B for light B... Please do not set different lights to different "channels". It will be very
troublesome to switch different channels frequently to adjust the lights. This may also
occupy other people's channels, which is easy to cause mutual interference.It is the wrong
way to use it.
Preview of the APP’S Interface
Short press the function key 2: the channel returns to 1
Short press the function key 3: the group number returns to A
Channel set to --: not controlled by bluetooth
Scan QR codes to download
on your Apple devices
Scan QR codes to download on
your Android devices
1. Search "Weeylite Pro" in the "APP Store" of Apple OS, find the dimming
APP, and download and install it to your phone.
2.For Android devices , scan QR code and download "Weeylite Pro" APP.
FX
26%
SOS
VILTROX
www.viltrox.com
3.There are two power supply modes for your choice. Lithium battery can be used
outdoor when DC power supply is inconvenient and appropriative power adapter
can be used indoor.
X,Y
Color Chip
Color Picker
My Scene
VILTROX
TEL: [phone] FAX: [phone]
MAIL: [e-mail] URL: www.viltrox.com
Address: No. 1207, Floor 12, Building B, Zhantao Building,Minzhi Sub-district, Longhua District, Shenzhen
Production Address: Floor 3, Building 1, Simaiou Science Park, No. 54, Juyuan Road, Qiuchang Town,
Huiyang District, Huizhou City, Guangdong Province
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body.