Use Tips

disk fragmentation.Go to [Start> Programs> Accessories> System Tools> Disk Defragmenter] to
perform disk consolidation.This job may take a little time.
● Your hard drive may have had a virus.
File damage.
● Please perform a surface scan of ScanDisk to check the disk. Double-click [my laptop],
right-click C: select [Properties], and in the error check status in the "tools" tab, click "start check"
to execute the disk scan program.
6.3 problems with the monitor.
When the laptop is turned on, the screen is black.
● Make sure the laptop is not in hibernation or wait mode. In these modes, the monitor is
turned off to save energy.
●Please press the function key to increase the brightness of the screen.
●Press the function key to make sure the laptop is not in CRT-only output mode.
The screen is not easy to read.
●Please press the function key to increase the brightness of the screen.
●The resolution of the monitor should be set to 1366 to 768 to get the best display effect.
1. Please go to [start > Settings > Control Panel] and double-click the [display] icon.
2. On the Settings page, set the resolution to 1366 to 768.
Screen flashing
● It is normal to see the screen flicker several times when you turn it on or off.
Bad points on the screen.
Due to the limitations of the LCD manufacturing process, there are usually some image
points on the LCD that can not normally display some colors (usually referred to as bad points),
which is a normal phenomenon, please rest assured to use. Please refer to the Chinese national
standard GB/T9813-2000 for details.
6.4 Memory issues
POST does not show increased memory capacity when you install more memory
●The memory stick may not be installed correctly.
●The memory stick is broken.
●Your system may not be compatible with some sticks of memory.
The operating system sent an error message that it was out of memory during the operation.