Use Tips

4.3 Boot (startup screen and startup equipment sequence setting)
A、Boot
Setting Configuration: Start the option configuration. The submenu is as follows, which is usually
set by default.
Quick Boot
Quiet Boot
Add On ROM Display Mode
Bootup Num-Lock
PS/2 Mouse Support
Wait For 'F1' If Error
Hit 'DEL' Message Display
Interrupt 19 Capture
B、Boot Device Priority: Start device settings. Its submenu is as follows：
1st Boot Device [SATA: PM-Hitachi HT]
When there is no other boot devices, only the hard drive.