How-To Guide

How To Use
Using Snooor
Despite using dynamic wearable technology, the device is extremely easy to use:
1: Remove a sticker from the stickers-pad and stick the bottom side on the back of the wearable using the
clearly marked white designated line.
2: Turn on the Snooor by pressing the upper left button for 3 seconds, you will feel Snooor vibrate the blue light
should appear shortly after. Release the paper from the sticker's upper side by using the finger lift and wear
Snooor on your forehead.
3: Snooor will auto-start 20 minutes after turned on, giving you the time to fall asleep.
4: To turn off the Snooor once you wake up, just press the on/off button for 3 seconds. The device also features
an auto-shutdown function, turning itself off automatically after 8 hours.
5: Once Snooor is turned off remove the used sticker.
For information on the adhesive stickers please click here.
For instructions on how to replace the battery please click here
Adjusting To Your New Sleeping Position
Re-training your body to sleep on its side can take some time. The first few nights of using Snooor may mean
that you wake up as your body breaks the habit of sleeping on its back.
This is just a temporary adjustment to a new, healthier and snore-free way of sleeping, so don’t give up after
just two nights!
The longer you use Snooor your sleep and that of your partner will be more and more satisfying.
FCC Statement
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable