Quick Start Guide

- 3 -
4
Start the Wi-Fi configuration following the in-App instructions or referring to below tutorial steps.
9:55
Devices Messages Me
Tap + to add a new device
Devices
 Using the supplied reset pin, reset the
device(please consult the user manual for more on
this)
 Wait for the LED indicator to flash RED
 Tap Next
Please reset the device
Install Doorbell
Next
9:55
Install Doorbell
Press the [Bell] button, and tap Next
Help
Next
9:55

d
th
P
ress the [Bell] button
,
and tap
Next
Hel
p
Please follow the instruction manual to
power the device
Please stay near your router for the best signal
Install Doorbell
Next
9:55
P
lease follow the instruction manual t
o
p
ower th
e device
Please stay near your router for the best si
g
na
l
Install
Doorbe
ll
Camera
Battery Camera Floodlight Camera
Network Video
Recorder
Doorbell
1. Tap “+” to add device 2. Select Doorbell 3. Check power status 4. Activate the doorbell 5. Reset device
Select your Wi-Fi network
Change WiFi
Hide Password
Home
Password123
(Please select a 2.4G network, this device will not
work with 5G Wi-Fi networks)
Wi-Fi Setup
Next
9:55
Scan QR Code
Scan the QR code below with the
device at a distance of 5-8 inches.
A tone will be heard when
successfully scanned.
Help Next
9:55
Please stay near your router for the
best signal
Device Found!
Connecting device to network...
Registering device...
12%
connecting...
Connect Network
Operation
Next
9:55
Please remove all film from the lens. Tap
Next to show a QR code, and let your
device scan the code. Keep your phone 5-8
inches from the lens.
15~25cm
5~8 in
6. Input Wi-Fi password 7. Prepare Code Scanning 8.Generate QR Code 9. Wait for connection
9:55
Devices Messages Me
Devices
056853326
10. Device Added