Installation Instructions

-10 -
4
Replace your existing doorbell.
5
Restore power at the breaker, and your doorbell is ready for use.
Remove the existing doorbell from
the wall and disconnect the wires.
Lead the wire through the holes on
the bracket before mounting.
Mark the screw holes location and mount
the brackets on your wall with screws.
Attach the wires to the terminals.
Wire extension kits are optional.
Wall mount
screw kit
Feed the wires back to the wall and
Mount the doorbell to the brackets.
Tighten the security screw at the
bottom of the bracket. All set!
Screwdriver
Security
Screw