User's Manual

SPECIFICATIONS
DC-Input: 5V, 1A
Output: 3W
Range: Class 2, up to 33 ft (10 m)
Li-ion Rechargeable Battery: 1200mAh
Charging Time: Approx. 3 hours
Battery Life: Approx.10 hours
Compatibility: Bluetooth
®
2.0 or above
device with A2DP/AVRCP
The Bluetooth
®
word mark and logos
are registered trademarks owned of
Bluetooth
®
SIG, Inc. and any use of
such marks by Brookstone is under
license.
@ 2017 Brookstone
CARE AND STORAGE
Store the speaker in a cool, dry place.
PLAYING MUSIC THROUGH A
WIRED CONNECTION
You can connect your audio device to
the speaker with a 3.5mm audio cable
(included).
1. Plug one end of the cable into your
audio device, just like you would a
pair of headphones.
2. Plug the other end of the cable into
the speaker's Aux-In Port. The LED
Indicator will illuminate solid blue.
3. Use your audio device to control
music playback, and adjust volume
through speaker.
PAIRING YOUR DEVICE
1. Prepare your device to pair using
Bluetooth® technology, making sure
you are within 33 feet of the speaker
Refer to your device’s owners
manual for details if necessary.
2. Turn on the speaker.
3. The LED lndicator will slowly flash
blue and the speaker is ready to pair.
4. Once the speaker is in pairing mode
and your device is ready to pair,
select 'Pocketune.' If prompted,
use 0000 as a PIN for the pairing
code. Once the speaker is selected,
the LED Indicator will be in soild blue
and the speaker will sound ‘do’
tone to confirm pairing is complete.
NOTES:
1. Aux-in will take priority over the
Bluetooth
®
connection. When Aux
cable is unplugged, the speaker
will reconnect to the phone via
Bluetooth
®
. A tone will sound.
2. You can connect the speaker to
other Bluetooth
®
enabled devices by
holding the Power Button 2 seconds.
The Power LED Indicator will flash
blue and the speaker is in pairing
mode again.
LISTENING TO YOUR AUDIO
DEVICE
1. Play your audio device as you
normally would.
2. Single press the Volume Up or
Down buttons to adjust the volume.
3. Long press the Volume Down or
Volume Up buttons will go back to
the previous track or advance to the
next track.
4. To pause audio, press the Power
Button on the Speaker. To resume
audio playback, press the same
button again.