Smart Waist Massager User’s Manual
Thank you for using this product. For ease of use, please read and keep this manual properly before use. The pictures in this manual are for illustration only, and the details are subject to the actual product. Safety Precautions This product can only be used on the waist and abdomen; It is forbidden to use the product on the head, chest, heart and other important parts； People with skin problems, such as injuries, allergies, infections, etc.
Patients with diabetes mellitus; Children; Patients with muscle injuries; Patients who wish to use this product for rehabilitation purposes. Product Introduction The smart waist massager produced by our company adopts ergonomic design, which is simple, fashionable and easy to operate.
Product Parameters Product Name: Smart Waist Massager Product model: SM918 Charging current: 1A Charging voltage: 5V⎓ Battery capacity: 2000mAh Rated power: 5 W Rated time: 15 minutes Charging time: about 2.5 hours Working temperature: 0 ~ 40 ℃ Product net weight: about 286 g Product size: 200mm * 95.5mm * 40mm Executive standard: GB4706.1-2005 GB4706.10-2008 Instructions 1. Connect the USB cable to 5V voltage, and then insert the type-c plug of the cable into the host.
7. Heating button: every time you press the button, the product will switch back and forth between low temperature, high temperature and off heating (every time you press the button, the voice will broadcast once). 8. Red switch key: Press the key once, and the product will switch back and forth between red on and red off (press the key once, and the voice will broadcast once). 9.
Key Description
Cleaning and maintenance Do not use sharp objects or corrosive, volatile, strong acid and alkali products to clean the instrument. After use, please clean the electrode plate. You can use a soft wet cloth or a cotton pad to wipe it gently. When the electrode plate is particularly dirty, you can use a soft cloth with a little medical alcohol (alcohol concentration is 75%) to wipe or disinfect it. Do not wash the instrument directly with water.
Frequently asked questions If any problem is found during use, please refer to the table below to check the abnormality. If the problem cannot be solved, please contact the after-sales service. Breakdown Unable to charge or no charge display It's normal, but I don't feel it.
3. To apply for warranty, the product and the certificate (purchase invoice) that can prove the date of purchase must be submitted to the after-sales service of the merchant. 4. The following conditions are not covered by the warranty: ① Damage caused by improper use, such as using the wrong power supply, inserting the product into an inappropriate socket, man-made damage, etc. ② Product aging and wear caused by normal use.
materials of the component is below the limit requirements specified in GB/T 26572-2011. ×：Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit requirements specified in GB/T 26572-2011. Of these, lead (Pb), mercury (Hg), cadmium (Cd), and hexavalent chromium (Cr (VI)) represent metals and other compounds. This mark indicates that the environmental protection service life of the product is 10 years.
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
