User's Manual

ManualsBrandsSHENZHEN JIUHU TECHNOLOGY ManualsAudio EquipmentBluetooth headphone

JH-ANC918 User Manual

A. Product Labeling

1. "+" key: volume up, next song

2.” ” Power on/off

3 "-" key: Volume down, the previous song

4. Bluetooth connection status indicator, charging status indicator,ANC status indicator

5. 3.5mm AUX audio jack

6. Charging port

7. Microphone

8. ANC switch

B. Function introduction

1. ANC on/off

•ANC on: In ANC off-status, turn the ANC switch on then the ANC indicator will be on.

•ANC off: In ANC on-status, turn the ANC switch off then the ANC indicator will be off.

2. Power on/off

• Turn on: In power-off status, long press the power on button, the blue and red light will flash alternately;

• Turn off: In power-on status, long press the power off button, the indicator light will be off

3.Match cell phones or other bluetooth device

• In power-off mode, press and hold the power on button for 3 seconds until the red and blue light flash alternately.

The headphone will enter pairing mode.

• Turn on the bluetooth switch of your phone or other bluetooth device.

• Search bluetooth pairing name "JH-ANC918" and click “connect".

• The bluetooth connection status indicator is flashing blue slowly with a success pairing tone.

• The headphone memorizes the current device and it will pair automatically for the second time.

4.Music player

• Press the power on/off button to play/pause music.

• Press the "+" key to increase the volume.

• Press and hold the "+" key to switch to the next song.

Summary of content (4 pages)

PAGE 1
JH-ANC918 User Manual A. Product Labeling 1. "+" key: volume up, next song 2.” ” Power on/off 3 "-" key: Volume down, the previous song 4. Bluetooth connection status indicator, charging status indicator,ANC status indicator 5. 3.5mm AUX audio jack 6. Charging port 7. Microphone 8. ANC switch B. Function introduction 1. ANC on/off •ANC on: In ANC off-status, turn the ANC switch on then the ANC indicator will be on. •ANC off: In ANC on-status, turn the ANC switch off then the ANC indicator will be off. 2.
PAGE 2
• Press the "-" key to decrease the volume. • Press and hold "-" button to switch to the previous song. 5.Call • Answer call: short press the power on button to answer the call by headphone when call is coming • End call:short press the power on button to end the current call. • Reject call:long press the power on button to reject when call is coming • Redial last number: double tap the power on button to call back the last call number on the phone. 6.
PAGE 3
completely eliminated. • The mobile phone may cause interference and noise to the unit. If this happens, place the unit away from the mobile phone. • Do not cover the microphone of this unit with your hand, the ANC function may not function properly, or buzzing may occur (squeak). E.About bluetooth communication • Bluetooth wireless technology works within a range of approximately 10m and may vary depending on the obstacles (body, metal, wall, etc.) or the electromagnetic environment.
PAGE 4
FCC Statement： This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.