User's Manual

Press
Start/Stop video
recording
Red light off Fully charged
Wifi/Important
Tag Button
Press and hold
for three
seconds
Turn on/off Wifi Solid green Standby
Press and hold
for fifteen
seconds
Soft reset, restore
factory settings
Blinking in green Video recording
Press
Mark video with
important tag
Wifi Indicator
Fast blinking
blue
Wifi turned on,
waiting to be
connected
Reset Button Press Power off Blinking in blue Wifi connected
Prompt Tone
Start video recording Beep
Stop video recording Two beeps
Important tag Three beeps
Battery low Two beeps once every ten seconds
Insufficient storage Three beeps once every ten seconds
2 Badge Customization
The front panel of the camera supports personalized information customization, which can
be achieved by pasting synthetic self-adhesive stickers or laser engraving on the metal
panel. Among them, self-adhesive stickers can express complex color content and avatar
information, and are easier to make. Usually, they can be customized in a print shop or
online printing shop (see the sticker size identification below). Laser engraving is limited by
metal material and craftsmanship, which can only reflect text information, and the font color
is gray and white. Styles of the sticker method and laser engraving method are shown in the
figure below.
- 3 -