User's Manual

under the vertical angle of the lens; The horizontal direction of the lens is
parallel to the ground.
★ Take out the power cord, open the fuse box to get electricity, connect
the power cords B+ (yellow), ACC (red) and GND (black) to the fuse box,
and connect the other end of the TYPE-C interface to the host.
★ After the power cord is connected to the car fuse box and this machine,
put the power cord along the edge or fix it in the edge crack.
★ Start the engine and check whether the machine has been installed
correctly and whether the video recording function is normal.
3. After the extension line of the rear lens is inserted into this machine, fix
it in the appropriate position of the rear windshield in the car, and put the