User's Manual

Installing support
★ Fix the machine at the windshield by 3M glue bracket.
Lens knob
★ Turn the lens up and down to adjust the angle of the lens.
II. Installation Guide
1. Insert the memory card
Insert the card: push the memory card straight into the card slot according
to the direction indicated by TF card icon in the body.
Remove the card: Push the memory card forward, and the card can be
removed after it pops up.
★ This machine supports 8~128GB TF memory card, and the card speed
is Class10 or above.
★ If it is the first time to use it, please format TF memory card with this
machine first.
2. Connect the power supply
★ Turn off the car engine.
★ Fix the machine on the appropriate position of the front windshield
with 3M glue and bracket provided with the machine. The installation
position should not affect driving, and then wipe the glass at the
installation position clean.
★ Adjust the lens angle to ensure that the front of the car is just visible