User's Manual

Problem Solving Section
If after pressing the talk button, you receive three “beep” and no dial tone, check the
following:
Base unit is plugged into a power source.
If you had a power failure or had unplugged the base unit, replace the handset on the base
unit for 2 to 5 seconds to reset the system.
NOTE:
If none of the telephones in the house are working, disconnect one set at a time to verify that
none of the phones are causing the problem. If you still have a problem after doing this, and
your telephone still does not work, please contact your local phone company.
1.
2.
31
TC970 MAUNAL black.p65 02-5-22, 9:4031