User's Manual

Caller ID System Operation
Setting the Time and Date
Press the PROG/MUTE button to enter the menu.
Press the {3 DEF} button to go to the time set programming option.
Press the FLASH/EDIT button to change the setting. the month will begin flashing.
Use the dial pad to enter the month in two-digit format. The date will begin flashing.
Use the dial pad to enter the date in two-digit format. The hour will begin flashing.
Use the dial pad to enter the hour in two-digit format. The minutes will begin flashing.
Use the dial pad to enter the minutes in two-digit format. AM and PM will begin flashing.
Use the dial pad to choose between AM and PM, where {1} is AM and {2 ABC} is PM.
When the final setting is programmed, the time and date are automatically saved. A
double beep will sound and you are returned to the options menu.
Continue with programming or press the PROG/MUTE button to return to the idle
screen.
Setting the Area Code
Press the PROG/MUTE button to enter the menu.
Press the {4 GHI} to go to the area code programming option.
Press the FLASH/EDIT button to change the setting. “----” will begin flashing.
Use the dial pad to enter the three digit area code that your phone number begins
with.
When the setting you desire is displayed, press the SAVE/MEM button to save the
setting. A double beep will sound to confirm the setting has been saved.
Continue with programming or press the PROG/MUTE button to return to the idle
screen.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
5.
6.
Note: Do not use the AREA CODE programming if you are required to dial 10 digits (xxx-
xxx-xxxx) to dial a local number.
17
TC970 MAUNAL black.p65 02-5-22, 9:3817