User's Manual

Placing Calls
1. Press the button, the Call Timer starts to count.
The HANDSET LCD Screen will display “CALLS”, and
“TALKING”, and the BASE UNIT IN USE LED indicator
will light up.
2. Listen for a dial tone.
3. Dial the phone number.
4. When you have finished with your call, press the
button again or place the HANDSET on the BASE UNIT.
OR
1. Dial the phone number.
2. Press and hold down the DIAL 7 , the DIAL 10
, or the DIAL 1+ button. The BASE UNIT IN
USE LED indicator will light up.
3. When you have finished with your call, press the
button again or place the HANDSET on the BASE UNIT.
Headset Feature
Your HANDSET, when connected to a headset (not included),
will provide you with hands-free communication. Pull out the
HEADSET JACK COVER, then insert the small plug at the end
of the headset into the HEADSET JACK at the left side of the
HANDSET. Follow the procedures discussed in “Receiving
Calls” and “Placing Calls” to receive and place a call.
NOTE: When you plug the headset plug into the HEADSET
JACK it automatically mutes the MICROPHONE and
SPEAKER of the HANDSET. Unplug the headset to
return the HANDSET to normal use.
Headsets are available at most retail outlets that sell telephone
equipment. The HEADSET JACK is compatible with 2.5mm
headset plugs only.
talk
1+
#
10
oper
0
7
*
talk
talk
12
Cordless Telephone Operation
TALKING....
CALLS
HEADSET JACK
HEADSET PLUG
(2.5mm)
SPEAKER
MICROPHONE
HEADSET