User's Manual

6
LCD DISPLAY INDICATORS
1. NEW: indicates the number of new caller ID data items that have not been
reviewed.
2. TOTAL: indicates the total number of stored Caller ID data items.
3. MEM: indicates the unit is in memory dial programming mode or memory
dialing mode.
4. REP: indicates how many phone calls have been made from the same
telephone number.
5. Arrow icon: indicates which arrow buttons can be used.
6. PROG: indicates the unit is in programming mode.
7. VIP: indicates that priority ringer has been set for the displayed number.
LCD BACK LIGHT
The LCD is back lit under the following conditions:
1. While receiving an incoming call (during ringing).
2. For 10 seconds, when the handset is picked up from the cradle.
3. For 10 seconds, when any button is pressed in the programming mode,
Caller ID review mode or stored number review mode.
4. For 10 seconds, when any button is pressed in any mode other than
those listed above.
* The LCD back light goes off 10 seconds after the talk mode is terminated by
pressing the TALK button, or immediately after the handset is placed in the
base.
ÿþÿ þ
þ 


ÿ




3050manual 2-20.P65 2002-5-31, 9:246