User's Manual

50
MESSAGE PLAYBACK
If there are only old messages,”You have (X) message”.Followed by received time and day will be
played.
If there are old and new messages,”You have (X) messages,including (Y) new
messages”.Followed by recived time and day will be played.
If there are al new message,”you have (X) new messages”.
To PAUSE Playback Message
During playback, press PLAY button to pause playback.
If you press PLAY button again within one minute,the unit starts playback from here it had been
paused.
If you do not press PLAY button within 1minute,the playback mode will be terminated,as the unit
will return to standby mode.
To stop playback message.
To Repeat the Current Message
After playbacked all new messages,during playback,press the “REPEAT” button once
To Repeat the Previous Message
During playback,press teh “REPEAT” button twice.
To Skip to the Next Message
During playback,press “SKIP” button to skip to the next message.
To Erase Your Messages
MESSAGES WILL BE SAVED UNLESS YOU ERASE THEM.
1. While play backing mesages,press the “ERASE” button,The following announcement
“Message erased” will be played as the particular message being erased.
2. At the end of the last message,the muit will announce “No More Message”,Press and hold
the “ERASE” button,then the following announcement “All messages erased” will be
played as all messages being erased.Any new messages can’t be erased unless they
have been reviewed.