User's Manual

43
4. Press the button once or button twice to start character editing,
and "J" will start to flash.
5. Press the button 9 times to move the cursor to the character
"S".
6. Press the ERASE button, and the next character moves one step to
the left .
7. Press the PROG (PROGRAM) button again, and "Save OK" will
appear for 3 seconds. Aconfirmation tone will be heard, indicating
that the new data has been saved, and the programming mode will
be exited.
Changing the second "O" in the caller name JACK
THOMSON to "A". Perform the following steps after step 4 in the
example above.
5. Press the button 10 times to move the cursor to the character
"O".
6. Press the 2 button once.
Example :
7. Press the PROG (PROGRAM) button again, and "Save OK" will
appear for 3 seconds.Aconfirmation tone will be heard, indicating
that the new data has been saved, and the programming mode
will be exited.
3050MANUAL 35-44.P65 2002-5-31, 9:2743