User's Manual

36
USING THE CALLER LIST
When a call is received, the name, telephone number, time and date of
the call are stored in the caller list. This list stores data for a total of 99
calls (with a maximum of 16 digits and 16 characters). The New Call
symbol on the LCD display will light, when there is data for calls in the
caller list that has not yet been viewed.
TO VIEW THE CALLER LIST
Perform the following operation in standby mode.
1. Press the CID button to display the caller list.
2. Press the button to view the information for the latest received
call.
• Another press of the button will display the information for the
call before the latest received call and so on.
• Press the button to view the oldest caller data. Note that you
cannot view already reviewed call data until all the new call data has
been viewed.
• When a caller makes repeated calls, the REP icon (instead of the
TOTAL icon) shows the number of calls that he has made.
• A "1" is automatically prefixed to the phone number of a call made
from outside the local area (if you have set your local area code).
Example :
When you are receiving a number "123-456-7890" the number
"1-123-456-7890" will be stored into the Caller ID memory.
3050MANUAL 35-44.P65 2002-5-31, 9:2736