User's Manual

CONTRASTADJUST

If you find the LCD display difficult to view, you can adjust it to one of three levels.

The default setting is Contrast 2.

Adjust the contrast according to the following instructions:

1. Hold down the ERASE button for more than 2 seconds or press theTALK

button twice to clear any displayed number and return to standby mode.

2. Press the PROG (PROGRAM) button.

3. Press the button 3 times or the button once.

4. Press the

or button to adjust the contrast.

5. Press the PROG (PROGRAM) button again to store the new contrast level.

The display shown below will appear for 3 seconds. A confirmation tone

will sound indicating that the new contrast level has been stored and the

programming mode will be terminated.

3050manual 2-20.P65 2002-5-31, 9:2418