User's Manual

AREA CODE SETTING

NOTE:

In order for the Caller ID redial feature to work properly, you must set your

area code.

1. Hold down the ERASE button for more than 2 seconds or press theTALK

button twice to clear any displayed number and return to standby mode.

] 2. Press the PROG (PROGRAM) button.

3. Press the

button twice or the button twice. (Once you enter an area

code, the previously set number will appear. If you do not want to change

this area code, hold down the ERASE button for more than two seconds to

terminate the programming mode.).

4. Use the number buttons to enter the area code.

5. Press the PROG (PROGRAM) button again to store the area code. The

display shown below will appear for 3 seconds. A confirmation tone will

sound indicating that the entered area code has been stored and the

programming mode will be terminated.

3050manual 2-20.P65 2002-5-31, 9:2417