User's Manual

HANDSET BATTERYCHARGING

The handset battery pack in the handset must be fully charged for about 10-14

hours before using the telephone.After connecting toAC power, leave the handset

unused in the cradle for ten to fourteen hours. Later, it will take less time for the

battery to recharge. The CHARGE LED on the base will be lit when the handset

is in the cradle.

NOTE:

a. When the battery gets low, LOW BATTERY will appear on the LCD, and the

handset will beep every 30 seconds.

b. If the battery becomes low while you are on a call, the TALK led will flash and

will sound one long beep. Terminate the call quickly and place the handset in

the base to recharge the battery.

c. The battery will hold its charge for several days out of the cradle, depending

on use.

NOTE:

The handset will not ring when the ringer is in "OFF" position. If the handset is

out of the cradle, the base unit IN USE LED will start flashing during an incoming

call.

DUAL CHARGING

The GH3050 is specially designed with a dual charge feature. The battery pack

will charge whether the handset is placed on the base facing up or facing into

the base.

NOTE:

When the belt clip is connected to the handset, the handset can only charge

correctly with the keypad facing into the base.

Charging the Handset without the belt clip.

Charging the Handset with the

belt clip.

3050manual 2-20.P65 2002-5-31, 9:2414