STOP... DON'T TAKE ME BACK TG THE STORE. LOOK... FOR THE TOLL-FREE HELP TELEPHONE NUMBER. LISTEN... AS THE EXPERTS TALK YOU THROUGH PROBLEM. For immediate answers to your questions regarding operation, missing parts or installation, call SOUTHWESTERN BELL FREEDOM PHONE RETAIL SALES HELP LINE AT: {-800-366-0937 MaondayFriday 8:30a. EST Saturday 30pm EST Southwestern Bell Freedom phone TTS Glen Harbor Blvd, Glendale, AZ 83307 Southwestern Bell Freedom Phone» 2.
[86 I} ‘When using your telephone equipment, basic safety precautions should always 3 be followed to reduce th risk of fire, electric shock and injury to persons, including the following: 5 1. Do not use this product near wale, for example, near a bath tub, wash bowl. . Kitchen sink, or laundry ub, in a wet easement, or near a intimating pool. 2. Avoid using a telephone {other than & cordless type) during an electrical storm. INTRODUCTION There may he a remote risk of electric shirk from lightning.
SAVE THESE INSTRUCTION CAUTION Use only 2 Southwestern Bell Freedom Phone® approved battery pack in the handset of your (3H2420 Cordless Telephone, Th reduce the kiss of fire or personal injury, read and follow these mat auctions. 1. Use only a Southwestern Bell Freedom Phone® approved Nickel Metal Hydroxide battery pack in the handset of your cordless telephone. For HANDSET UNIT: GP Ni-MG Barney GPOAAAHIBMN 1.6V, 600mAh 2. Do not dispose of the battery i 8 Bre, as it may explode.
LCD DISPLAY INDICATORS NEW grew «PRIG 3——— MEM REP ith dn HY 1. NEW: indicates the umber of new caller ID data items that have not been reviewed, 2. TOTAL : indicates the total saner of stored caller 1 dots elms. 3. MEM: indicates the unit is in memory dial programming mode or memory dialing mode. +. REP: indicates how many pious calls have bear made from the same telephone inhere. 5. Aerate icon: indicates which mow buttons can be used. 6. PRIG: indicates the unit is in programming mode. TF.
Federal Communications Commission Requirements This equipment complies with Part 68 of FOC Rules and ACTS technical requirements. & fable on the BASE UNIT of this equipment contains, among borzoi information, the Registration Number and the Ringer Equivalence Numbers (REN) for this equipment, You must, pen request, provide this information © your telephone company.
INTRODUCTION ABOUT THE GH2428 The GH2420 is a 2.4GHz Cordless Telephone with call waiting Caller ID and gta] answering system. It is designed and engineered to exacting stand ids for reliability, long life, and outstanding performance.
120 VOLT OUTLET/TELEPHONE JACK : WALL MOUNT INSTALLATION 1. This telephone requires a modular phone jack (RICER) and standard 120 volt Base git may be mounted on 2 standard wall plate or onto two screws {not included) antler. | that you fasten (© the wall. 2. Plug phone directly into outlet, 3. Da not plug ether appliances into this outlet or have the outlet controlled by 3 wall switch.
HANDSET BATTERY CHARGING The handset battery pack in the handset must be fully charged for about 16-14 hours before using the telephone. After connecting to AC power, leave the handset sassed in the cradle for ten to fourteen hours, Later, it will take less time for the hater to recharge. The CHARGE LED on the base will be it when the handset is in the cradle. 8 When the battery gets low, LOW BATTERY will appear on the LOD, and the handset will beep every 30 seconds. b.
ES RD J LANGUAGE SELECTION The unit offers a choice of thee LCD display languages: English (the default value, French or Spanish. Follow the instructions given below to set your language choice. 1. Hold down the Delete button for more than 2 seconds or press the TALK button twice to Clear any displayed number and ream to standby mode. i i SPECIF. Press the PRIG (PROGRAM) gluttonous. I (i Mev store Input dial 3 Press the a baton once or fe ¥ button 3 times. Brussels LL Liberalize) 4.
CONTRAST ADJUST SETTING THE RINGER ON/OFF CONTROL 1f you find the LED display difficult to view, you can adjust it 10 one of ties levels.
RT OUT-OF-RANGE, ALARM You are out of tangs and should move closer to the base anti wheat te following happens: » You hear noise or static. + Pressing the TALK bunion generates an error tone. (three short beeps) ~ Pressing the CID button when 3 number is displayed on the LCD generates an Dermot tone, + You cannot receive an incoming call. Selecting a different channel The base unit will automatically search for the clearest Shane in the standby mods.
Direct dialing 1. In the standby mode, you have the following direct dial options: redial the last number called by pressing the REDIAL button, retrieve from the two-touch dial Memory of relieve from the caller list. + Hf you press the wrong button when dialing (ie amber, press the Delete button momentarily to clear the last entered digit. 2. Press the CID button to start dialing the number on the display. For information on the different dialing methods.
ANSWERING A CALL When you receive 3 call, the name and telephone number of the caller is shown on the LCD display. When (he handset is on the base unit I. When the GH2420 rings, remove the handset from the base unit. The TALK button and the IN-USE LED at the base uit light, indicating that & connection hag been made. The call mee will display os soon as the call is answered. [FER RR Jack Thomson 535-1234 2.
USING THE HEADSET JACK The PACE bunion cannot be used fu the fulfilling conditions: Your telephone con utilize « headset (not included) to be connected to your HEADSET {when the handset fs on the base unit. for you to enjoy a hands-free communication. When you plug in the headset plug dno (when the handset is in the talk mode. the HEADSET JACK, if automatically mutes the microphone and speaker of the HEADSET. Unplug the headset to return the HEADS To normal use. The HEADSET NOTE: JACK is compatible with 2.
The speed dist memory has twenty memory locations that can each stare one 16-digit B B telephone number and one 16-character name, fn addition to telephone numbers that you often use, you can store special access codes required in chain dialing, such as banking transactions. 3. Press the 7 button three times to enter the second character "R". . mea) STORING NAMES AND TELEPHONE NUMBERS il i TREY PANES AND TELEPHONE NUMBERS Storing the telephone number 3551234 with the name { Grandmother in location number 8.
7. Press the MEMO (MEMORY] bunion. Sop | 8. Elmer 2 digits (01-jonquil the dialing keypad to assign the Location number where your want to store the telephone bumper. + Note that a 0 must be added 10 the beginning of location numbers 1 19. » If the data is stored ina location where data has already been stored, the okd tads wilt he overwrites by the new data. 3 seconds.
VIEWING AND DIALING FROM THE DIAL MEMORY 1. Press the MEMO (MEMORY) button in the standby mode. 4. Press the » button ones more or the «bunion twice to view the full name. You can rr 1 rend wo the ineligible display by pressing the » button sue more or the + button ¥ twice, JE ey MER MARIE ANTOINE i LETTER : 2. Truer the location number or use the 4 of ¥ button until you find the desired br name snd telephones number. The displayed dial number will be cleared from the display sander the following i .
VIP (PRIORITY RINGER} This faction allows you to recognize an incoming caller from the ringing soiled by assigning a priority ringer to the designated telephone musher from the speed dial memory. En the standby mode press the MEM (MEMORY) button, ww ¥ 2. Enter the location number or press the a or » button to select the caller in the speed dial memory to which you want to assign a priority ringer. wen | Rd Dawes Jonson I 123d4ERT) x When you fiend the desired caller press the PROGRAMMING) bun.
USING THE CALLER LIST DELETING CALLER LIST DATA When a call is received, the name, telephone number. time and date of the call are stored The unit can store up ta 99 caller data items, the oldest entry automatically be in the caller list. This list stores data for a total of 99 calls (with a maximum of 16 digits deleted when the 100th item is stored, You cam also delete the caller data items and 16 characters). The New Call symbol on the LOD display will light, when there is.
DELETING ALL CAl LIST DATA 1. Press the CTD button when no telephone number is displayed on the LCD to apes the caller Hist, Hew Call ziz Total 2. Press the PRIG (PROGRAM) bunion. Crass the TALK bun i you do not wast to delete all of the caller ist data, Ey JEER ERT ! 3. Press and release the Delete bunion to delete all caller lst data.
4. To rerun to the original display, press the » button enc again or «bunion three EDITING OR ERASING CALLER LIST DATA tines move. Tn the following situations, it may uot be possible to view the called } " dat You cam es fit or erase received telephone number and nine data in the caller list using the following steps.
desert "5 at the beginning of the telephone umber, Buffoon the following steps after steps 1-4. 5. Press the ERASE button momentarily. The first digit * 1" will be deleted and the second digit will start flashing MoE Te | 123-456-7050 6. Press the 5 button, and “5° Is inserted before the first digit. RE F GE Eat 5|e 456TH 7. Press the PRIG (PROGRAM) button again, and "Save OK will appear for 3 seconds.
STORING A CALLER LIST TO TWO TOUCH SPEED DIAL MEMORY Caller names snd telephone numbness in the caller fist an be stored in two touch speed phial memory. Boring called list tern to memory location 8. 1. Press the CID button when no telephone number is displayed on the LOD 10 open the caller list. = Ht Oh Hew Call 5 8 Total PEE 2. Elect the desired caller tads using the 4 or » button, Eh JACK SHORT 125-486-7200 3.
ANSWERING SYSTEM OPERATION To Record Outgoing Greeting Your system comes with a prerecorded outgoing greeting. To record your own Cunning reeking. 1. Press GREETING button, the previous recorded greeting playbacks (If your personalized outgoing greeting has pot been recorded, you bear Default greeting “Hello We are not available now, pleads leave your name snd number after the beep” } Press and hold the Greeting button, After a beep, speak early towards the built in microphones. (in the front of the base).
RING SYSTEM OPERATION MESSAGE PLAYBACK 5. Pros “ SKIP to advance or * REPEAT ” to reverse the hour show i the Incoming Messages display. 5. tine SET" tu set the minutes you will hear “ob™ haste “0° is When the Message Coulter is 15, the unit is ready to answers incoming call displayed in message counter. 7. Press “SKIP” 1 Increment or “REPEAT” to decrement the minute in the display. The machine hangs up and resets to answer the next call in the following cases: 8. Press “TIME SET" neutron.
AGE PLAYBACK {i teeth are only old messages, “ You have {X) messages”. Followed by received time and day will be played. If there ase old and new messages, “You have (X) messages, including new messages” . Followed by received time and day will be played. If there are ull pew message, “you have (X} now messages” “Fo Stop Playback Message During playback, press PLAY/STOP button to pause playback. H you press PLAY/STOP bunion again within one inmate, (he wait sas playback from here it had been paused.
TONE REMOTE OPERATION To 55 the (i-2420 from a remote phone, you need fo enter a 3.Digit Remote Access Code. ‘The default secs 1-2-3, You can program the code to any 3-digit number you wish. To set Remote Access code 1. Press PIN attribution the base). Then you will hear the current assiduous code. (ine, two, three”, 2. Press and hold PIN button for more than 2 seconds, The cure first remote code digit is announced and displayed. You will hear “Press the skip or repeat button set the first digit. 3.
TONE REMOTE OPERATION (operation Press Congruity code Key XXX Announcement You have X messages, including Y new messages. Press | fo playback messages. Press 2 to ores all message. fs 4 to record a new greeting. Press 1 w playback Press 2 to case the message, 416 reaper, 6 to skip, After the last new message Nis more messages, press 7 io FEA 10 IAD men, TE “17s pressed to playback messages,all of thy messages will playback Tier he fast ad message bong played Ho moe messages.
TONE REMOTE OPERATION Operation Key | Announcement Press REMOTE AH BUTTON You have X messages, Including ¥ new messages. Press 1 io playback messages. Press 2 10 erase all message, Press 3 go record a new greeting. Press { to playback 1 | press? w erase the message, 4 to repeat , 6 fo Skip After the last new message Mo more messages, press 7 to rem fo main mend.
AGA Important Notice PINT RINGS WHILE YOU ARE RETRIEVING MESSAGES IF THE TEI WITH THE HANDSET. RETRIEVING 18 TERMINATED ARD THE UNIT ANSWERS THE Carl. 1 you have following the instructions in this menus, sad have difficulty operating your Southwestern Bell Freedom Phe ke Cordless Telephone, locate the PROBLEM in the 1271 os iow. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns 15 locate sad remedy the problem, PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION The pit will prosper installation.
A. Avoid outing triteness phones near heating appliances and devices that generate electrical notes (motors, fluorescent lamps, microwaves, televisions, ete) B. Avoid rough treatment of the phone by placing the handset greatly info the base when hanging up. Avoid dropping the handset, £. Clean your cordless chicane Monty with a soft cloth slight dampened with water ar mild hand soap. Do not we any type of solvent of abrasive cleaner. Before cleaning, always hiphuggers the phone from the wall outlet, .
This one-year Emitted warranty is in lien of all other expressed warranties, obligations, or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES. INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED PN DURATION TO THE ONE-YEAR DURATION OF THIS WRITTEN LIMITED WARRANTY. SOME.
This page serves as a template for attachment of screws to the wall when mounting this telephotos on the wall f. Cur out this page. 2.
