Southwestern Bell Freedom Phone R 2.4GHz CORDLESS TELEPHONE STOP - DON T TAKE ME BACK TO THE STORE. LOOK - FOR THE TOLL - FREE HELP TELEPHONE NUMBER. LISTEN - AS THE EXPERTS TALK YOU THROUGH THE PROBLEM. For immediate answers to your questions regarding operation missing parts or installation call: Southwestern Bell Freedom Phone R Help Line dt 1-800-366-0937 Monday - Friday 8:30 a.m.- 9:00 p.m. EST Saturday 8:30 a.m. - 12:30 p.m.EST http://www.swbfreedomphone.
G h 2 4 1 0 TA B L E O F C O N T E N T S Important Safety Instructions ...........2 Battery Cautionary Instructions ........ 3 Location of Controls and Features....5-9 Handset .................................5-6 Base ..................... ................7-8 LCD Display ..............................9 Choosing a Location .....................10 Telephone Setup......................11-13 Connecting the Base ..................11 Wall Mounting ..........................12 Tone/Pulse Switch ...................
B AT T E RY C A U T I O N A RY I N S T R U C T I O N S BATTERIES: CAUTION To reduce the risk of fire or injury to persons, read and follow these instructions: For the cordless handset, use only 3.6V 600mAh Nickel - Metal Hydride Rechargeable battery pack cordless telephone battery pack (included). Do not dispose of the batteries in a fire. The cells may explode. Check with local codes for possible special disposal instructions. Do not open or mutilate the batteries.
LO C AT I O N O F C O N T R O L S A N D F E AT U R E S LO C AT I O N O F C O N T R O L S A N D F E AT U R E S 3.Talk Talk The Talk key is used to access the telephone line or end a call. 4.Temporary Tone/View Right key If the base is set to pulse dialing, pressing causes subseqent digits to be dialed out using tone until the line is put back on hook Alse used to view the right part of the display and move the cursor left when editing. 5.
LO C AT I O N O F C O N T R O L S A N D F E AT U R E S LO C AT I O N O F C O N T R O L S A N D F E AT U R E S Base Base Back View Data Jack USE ONLY WITH CLASS 2 POWER SOURCE 9VDC 300mA T/P Charge LED - + TEL Page Button Charging Contacts Data Jack Used for connecting a computer or fax machine. Tone/Pulse Switch Used to set the dialing method for tone or pulse dialing. Page - Used to initiate a handset page.
LO C AT I O N O F C O N T R O L S A N D F E AT U R E S C H O O S I N G A LO C AT I O N Do the following: LCD Display Name Character Field Choose the best location Connect the phone Choose the dialing mode Away from VCRs and TV sets and other electronic equipment Number Field AM : / # NEW RPT Away from heat sources, such as radiators, air ducts, and sunlight Date/Time Display New lcon or Call/Entr y Number Away from noise sources such as a window by a street with heavy traffic RPT or Total Call
TELEPHONE SETUP TELEPHONE SETUP Wall Mounting Connecting the Base The GH2410 telephone may be installed onto two screws (not included) fastened into the wall.When installing screws into plasterboard walls use wall anchors (not included) to ensure that the screws remain secure. Insert the screws into the wall leaving 3/16" of each screw extending out from the wall. The Gh2410 is not compatible with mounting on a standard telephone wall plate.
TELEPHONE SETUP B AT T E RY I N S TA L L AT I O N To install the 3.6V 600mAh cordless handset batter y pack: Tone/Pulse Switch 1. Choose the correct dialing mode. 1. Slide open the batter y compartment door on the back of the handset. 2. Select the dialing mode Tone or Pulse by setting the switch at the back of the base unit. 2. Plug the batter y connector into the 2-pin connector in the batter y compartment and then insert the batter y.
H A N D S E T A N D D ATA JA C K B A S I C D I S P L AY S Handset ldle AM The Headset Jack The headset jack is located on the side of the handset and is a standard 2.5mm plug. Simply plug the headset into the jack and the headset will be active. Line Muted MIN TOTAL NEW Volume Control SEC Call Timer Note: When the headset is plugged into the telephone the microphone and earpiece on the handset are not active. MIN Belt-Clip Install the belt-clip as shown.
B A S I C O P E RAT I O N B A S I C O P E RAT I O N Making Calls Redialing 1. Pick up the handset from the base. to press TALK key 1.Press MIN Southwestern Bell Freedom Phone MUTE R CID ERASE CH VOL REV TALK . MIN SEC 2.Wait until you hear a dial tone and then press REDIAL to redial the number last dialed(up to 32 digits.) SEC 2.Wait until you hear a dial tone and then dialthe number you wish to dial. 3.
SETTINGS SETTINGS Handset Settings Key Function You can change the setting on the handset in the options menu. Access the options menu by pressing and holding the PROG key until ENGLISH is displayed. There are 12 settings in the options menu which can be changed. You can scroll through the option menu in the listedorder by pressing the key. Settings which have a Listed number can be reached directly by pressing that number on the keypad.
TELEPHONE SETUP TELEPHONE SETUP 7. Use the dial pad to enter the minutes in two-digit format. AM and PM begin flashing. Turning the First Ring On or Off You can turn off the first ring of the phone so that it does not ring until caller ID information has been displayed. 1. Press and hold the PROG key . 2. Press 2 ABC to go to the first ring programming option. # Southwestern Bell Freedom Phone ERASE CH VOL SAVE TOTAL 10. Continue with programming or press to the idle screen. REV 4.
TELEPHONE SETUP TELEPHONE SETUP Turning PBX Mode On or Off Adjusting the Contrast 1. Press and hold the PROG key to enter the menu. The contrast is optimized for viewing and will probably not need to be changed from the default setting. It will adjust the display background lighter or darker. 2. Press 1. Press and hold the PROG key to enter the menu . 2. Press # MUTE R TOTAL CID ERASE 3. Press FLASH/EDIT to change the setting. " 2 " will begin flashing. CH VOL REV ERASE CH VOL REV 4.
TELEPHONE SETUP TELEPHONE SETUP Disabling the Ring for Private Calls Deleting Message Waiting Indication Clears any current message waiting indication. See page 37 for more information about message waiting. 1. Press and hold the PROG to enter the menu. Turns the ringer on or off for all calls where the caller has blocked their caller ID 1. Press and hold the PROG key. 2. Press 9 WXYZ to go to the message waiting programming option. 2. Press to go to the unavailable ring programming option.
SPEED DIALING SPEED DIALING The Gh2410 will store up to 20 speed dial numbers in the order that they are programmed. No duplicate numbers can be stored. Storing Phone Numbers 1. With the handset in the idle state, press MEM TOTAL 2. Press FLASH /EDIT to create a new phone book entr y. / Southwestern Bell Freedom Phone MUTE R CID ERASE CH VOL REV TOTAL 3. Enter the name you wish to store using the dial pad to enter the letters (up to 15 letters).
SPEED DIALING SPEED DIALING Editing a Stored Number Making Calls From the Phone Book 1. To make a call from the phone book, press AM / MEM/SAVE 1. Press AM TOTAL 2. Locate the number you wish to dial using Southwestern Bell Freedom Phone MUTE R CID # ERASE # MUTE R REV CH VOL REV PAUSE SAVE OPTION 4. When you are finished with your call, press place the handset back on the base.
SPEED DIALING CALLERID Preferred (VIP) Calls You can assign stored numbers as preferred calls. When an incoming call is Caller ID allows the caller's name and phone number to be shown on the display before you answer the call. In order to use this feature you must first subscribe to Caller ID service with your telephone company.
CALLER ID CALLER ID Caller ID with Call Waiting Service Caller ID Displays Display shows name and number, time and date of the call. AM In order to use the "Call Waiting Caller ID" service you must subscribe to a telephone company that offers Caller ID service combined with "call waiting" service. / Display shows number-only service. AM RPT / AM "UNAVAILABLE" will be displayed when Caller ID information is not available.
CALLER ID CALLER ID Deleting Caller ID Records Returning Caller ID Calls When viewing the Caller ID information you can delete a single call record or all the call records. You can return calls by using the Caller ID callback feature. 1. Press CID . To Delete a Single Record 1. Press CID . AM 2. Use RPT / 2. Use the call back. NEW to scroll to the call record you wish to to scroll to the call record you wish to delete. AM 3.
MESSAGE WAITING If you subscribe to voice mail from the telephone company and if there are voice messages that have been left in your voice mailbox, the display will show "MSG WAITING" (see note below). O T H E R F E AT U R E S MSG Using the Handset Finder (PAGE) 1. Press AM / PAGE on the base. If the handset is within range, it willbeep for 20 seconds. TOTAL NEW NEW Note: This function requires voice mail subscription from the local telephone company.
CARE AND MAINTENANCE Your GH-2410 telephone has been designed to give years of trouble-free service. It is a sensitive electronic instrument. To assure its longevity, please read the following maintenance instructions. 1. Keep the GH2410 away from heat as high temperatures can shorten the life of the electrical components and distort or melt its plastic parts. 2. The GH2410 should be kept free of dust and moisture. If it gets wet, wipe it dr y immediately.
TROUBLESHOOTING Notioe:This equipment meets the applicable lndustr y Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC before the registraion number signifies that registration was performed based on a Declaration of Confomity indicating that lndustr y Canada technical specifications wrere met. It does not imply that lndustr y Canada approved the equipment.
WARRANTY ORDER FROM This Southwestern Bell Freedom Phone is warranted to the original purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt.
F C C R E G U L AT I O N S This equipment complies with FCC Regulations 15 and 68 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS-210. A label is located on the underside of the base unit containing either the FCC registration number and Ringer Equivalence Number (REN). You must, upon request, provide this information to your local telephone company. This equipment is compatible with inductively coupled hearing aids.
