Installation Instructions

iBabyI - Baby Monitor
Tel:[phone] Mail: [e-mail] Address:912 5A Building,ECO-
Technology Park,Yehai street,Nanshan district,Shenzhen city,Guandong province,China
Sleep detection function
a. Detection distance: 2.5m (detection distance between human and radar
antenna surface) The
b. Sleep quality assessment function: awake / light sleep / deep sleep
c. Sleep time recording function: the data output of the relevant
duration of sleep quality
d. In bed function: in / off bed
a. Detection distance: 0.4m≤x≤2.5m (detection distance between chest
cavity and radar antenna surface)
b. precision:≥90%
a. Distance measurement: 0.4m≤x≤2.5m (detection distance between chest
cavity and radar antenna surface)
b. precision:≥95%
a. Detection distance: 2.5m (detection distance between human and
radar antenna surface)
b. precision:≥90%
Move detection
a. Movement trigger
b. Motion direction and position perception
Installation
This radar module recommends tilt installation and a distance
of 1.5 m parallel to the scanning surface。
Slant installation
For the demand of sleep breathing and heartbeat detection, the
radar should be installed tilted (as shown in Figure 5). The radar
should be installed 1m directly above the bed and tilted 45 between
the bed. The distance between the radar and the chest cavity is