Installation Instructions
Table Of Contents
- model：iBabyⅠ
- (Ver.1.0)
- 1. Summary2
- 3. Major function
- 6. Attentions 10
- 10. FCC Caution11
- 1. Summary
- Characteristic：
- 2. Electrical characteristics and parameters
- 3. Major function
- 3.1 Radar operating range
- 3.2 Sleep detection function
- a. Detection distance: 2.5m (detection distance be
- antenna surface) The
- b. Sleep quality assessment function: awake / ligh
- c. Sleep time recording function: the data output
- duration of sleep quality
- d. In bed function: in / off bed
- 3.2.1 Respiratory detection function
- a. Detection distance: 0.4m≤x≤2.5m (detection dist
- b. precision:≥90%
- 3.2.2 Heart detection function
- a. Distance measurement: 0.4m≤x≤2.5m (detection di
- b. precision:≥95%
- 3.2.3 Existence of detection
- a. Detection distance: 2.5m (detection distance be
- b. precision:≥90%
- 3.2.4 Move detection
- a. Movement trigger
- 4. Radar operation and installation method
- 5. Typical application mode
- 6. Attentions
- 7. Disclaimer
- 8. Copyright description
- 9.Contact information
- 10.FCC Caution:
iBabyI - Baby Monitor
Tel:0755-86567969 Mail: jhxk@xkgtech.com Address:912 5A Building,ECO-
Technology Park,Yehai street,Nanshan district,Shenzhen city,Guandong province,China
Summary
iBabyI is using 60G millimeter wave radar technology to realize
human respiratory heart rate perception and sleep assessment. The
module is based on the FMCW radar system, aiming at the output of the
respiratory heart rate frequency of personnel in specific occasions,
combined with the long-time sleep posture body motion acquisition,
and timely reporting the record of personnel's sleep state and
history.
Characteristic：
Radar detection is realized based on FMCW FM continuous wave signal
To achieve the synchronous perception of human respiration and
heart rate
Realize a historical record of human sleep quality
Human sleep quality monitoring to detect the maximum distance：≤2.5m
Human respiratory heart rate detects the maximum distance： ≤2.5
Not affected by temperature, humidity, noise, airflow, dust, light
and other environments
A Universal UART / RS485 communication interface that provides a
general protocol；
Someone to unmanned detection (report) time: according to the
algorithm, the typical value is 30 seconds
(a) front
(b) back
m