Lumio User Manual Retractable UV Light Toothbrush ( Extraordinary Series )
01/Description
02/ Important Safeguards Warnings ◼ DO NOT disassemble the product or tear open the automatic retractable part. UVC wave is built in for sterilization. Stop using it if the automatic lid is damaged or the UVC is exposed to avoid irradiating the skin or eyes when UV light functioning. Users bear the responsibilities if any discomfort or injury is caused by improper uses. ◼ Keep the charger away from water. DO NOT place or store above or near any container with water, such as bathtub, washbasin, sink, etc.
Reminder ◼ The power cable is made of general USB-Micro USB cable. Please replace it with a qualified cable once the power cable damaged. ◼ Keep away from surfaces with great heat while charging. ◼ Do no charge when sonic vibration motor is operating, or the brush head is extended or retracted, or the sterilization light is on. ◼ Use a qualified adapter. ◼ Do not disassemble or replace the battery when the battery life is consumed, otherwise it may lead to product failure.
03/ Instructions 3.1 Brush head extension and retraction ⚫ Push the button to extend the head out of the body. ⚫ Quickly push the button twice after use to retract the head into the body. Reminder: Do not extend or retract while the product is vibrating. Extend or retract when the vibration stops. Retracting Button 3.2 Mode Selection / Sterilization ⚫ Press the function button to activate the standard cleaning mode.
⚫ When the brush head is inside the product body, press the function button twice to perform sterilization. The green light flashes to indicate that the toothbrush is performing UVC sterilization program. After 60 seconds of auto-sterilization, the light will be turned off. Function Button 3.3 Wireless Charging ⚫ The toothbrush contains residual power before it leaves the factory leading to the flashing of red light. Please charge it in time to avoid the brush head from abnormal movement.
3.4 Replace the Brush Head ⚫ Press the button to extend the brush head and pull the brush head upwards and disassembly it. ⚫ Keep the brush head facing the same direction of the button on the body, and insert the brush head into the body.
CAUTION ◼ Make sure that the toothbrush is fully charged, and the charging light turns from three lights flickered to constant. ◼ Turn on the product and examine it before the first time of use. The blue light will be turned on when the brush head is extended by pressing the button. The brush head is then activated to vibrate, indicating successful operation. The standard cleaning mode is selected by default when the product is turned on.
04/Mode Description 1. Standard Cleaning Mode (Blue Light) It is the default mode when the product is turned on. which is suitable for people with more sensitive teeth and gums. (Working frequency 280 Hz, about 33,600 vibration per min) The cleaning mode lasts 2 minutes. If you need to extend the cleaning time, you can repeat this mode. 2. Intensive Cleaning Mode (Green Light) Intensive cleaning mode has a higher vibration frequency than the standard mode.
05/Specifications Standard Components: product body*1, brush head*3, (including the one on the body), charging base*1, power cable*1 Charging Method: Inductive charging Power Input: 5V / 2A Waterproof Rating: IPX-7 Working Mechanism: Sonic wave vibration After-Sale Service: 2 year warranty Operating Current: 30 mA (with output power 200 mW) Charging Time: Around 5 hours
06/Maintenance Brush head ⚫ Rinse the brush head and bristles with running water after each time of use, shake off the water on the brush head and then retract the brush head to enable more effective sterilization. ⚫ It is recommended to replace the brush head every 2 to 3 months. To ensure better experience and prolong the product life, please replace the original brand in time. Toothbrush Body ⚫ Do not use sharp objects or steel wool to clean the body, instead use clean water directly.
Important Notes： ◼ Keep the product away from excessively hot or cold area, otherwise it may cause product failure, fire or explosion. ◼ Avoid strong impact, otherwise the product and its accessories may be damaged, resulting in product failure. ◼ Do not disassemble or modify the product and its accessories without approval from the company, otherwise the product and its accessories will not be covered by our warranty. Please contact customer service if the product fails.
07/Warranty Coverage The warranty is limited to the non-human damage caused quality problems of the product during the warranty period under valid operation. The following services will be provided in accordance with the country’s regulation when receipt and warranty card is presented: ◼ Failure occurs within 7 days from the date of purchase, and the seller is responsible for free return, replacement or repair.
◼ Damage to products and accessories caused by human factors. ◼ Damage caused by failure to use or maintenance in accordance with the instructions. ◼ Damage caused by force majeure such as flood, fire or lightning strike. ◼ Use of accessories from other brand may cause product failure or accident. ◼ Product without warranty card or valid receipt and cannot be proved that it is within the warranty term. Manufacturer：Shenzhen Jibie Technology Co., Ltd.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
