User's Manual

Can I attach a leash to the Collar Receiver?
No, this can result in pulling the Contact Points too tightly against the dog’s neck. Attach a leash
to a separate, nonmetallic collar or a harness. Ensure the extra collar does not put pressure on
the Contact Points.
How long can I leave the Collar Receiver on my dog?
The design of the collar discourages constant wearing. We recommend not having the dog wear
the collar for more than 12 hours out of every 24-hour period.
Is the training system suitable for all dogs?
The collar is adjustable from length 5.9” (15cm) to 19.6” (50cm), if the dog’s neck circumference
is smaller than 5.9”, you will be forced to rethread the collar, if the dog’s neck circumference is
larger than 22”, this collar may not be suitable for the dog. This collar is not suitable for dogs
under 15lbs.
Troubleshooting
My dog is not responding after successfully setting up the training system.
Charge the Remote Transmitter and Collar Receiver for 6 hours, separately before first use.
Ensure the Remote Transmitter and Collar Receiver are powered on.
Check the intensity levels of vibration and static shock, making sure it is not set to 0.
Ensure the Collar Receiver has sufficient power to operate.
Check the collar to ensure it fits snugly against your dog’s neck.
If tested for all of the above and the dog is still not responding, please try re-pairing the Remote
Transmitter and Receiver Collar.
The Remote Transmitter does not work.
Check the battery status of the Remote Transmitter.
If the battery is low, please recharge the Remote Transmitter