User's Manual

4. If needing to pair a second Collar Receiver, follow the same steps but first push your
Toggle Switch in the other direction.
Step 3 - Test the Training System Functions
The testing methods will help determine whether the training system is functioning as
intended and will also teach you how to operate the system. Please ensure that the
pairing process is complete before attempting to test the functionality.
Testing the Electronic Pulse Stimulation
Electronic Pulse Stimulation Tester
In your package that you received, you will find a clear almost translucent plastic piece that has
a light bulb/fuse in the middle of it. This is your Electronic Pulse Stimulation tester. This
component DOES NOT attach to the Collar Receiver by any means and is only for testing the
static shock mode. To test the Electronic Pulse Stimulation, follow these steps:
1. Put the test light over the Electrodes of the Collar Receiver you wish to test.
2. Ensure the Toggle Switch is in the correct position for the Collar Receiver you’re testing.
3. Adjust the Intensity Dial off of 0.
4. Press the Stimulation Button on your Remote Transmitter.
5. If done correctly, the test bulb should flash orange indicating the electronic pulse
stimulation is operating correctly.
(need to have diagram of test bulb on contact points)
Note: If wanting to test the shock function on yourself, please ensure your finger or hand is
across both contact points to ensure the connection is complete. Otherwise, user will feel no
stimulation.
Testing the Vibration Functions
1. Ensure the Toggle Switch is in the correct position for the Collar Receiver you’re testing.
2. Adjust the Intensity Dial off of 0.
3. Press the Vibration Button on your Remote Transmitter.
4. If done correctly, the Collar Receiver will vibrate.