User's Manual

Remote Transmitter
• Antenna: Transmits signal from Remote Transmitter to the Collar Receiver
• LED Display: The numerical value shows the intensity of the electric shock or vibration
(The intensity of the sound can not be adjusted, and will always display as 000), rotate
the dial to adjust the level of vibration or static shock stimulation
• ON/OFF: Press this button to turn the LCD display on and off, the product can only be
used normally when the LCD display is on
• Transmitter Indicator Light: Flashes green when any of the stimulation buttons are
pressed. Will blink red if battery power is low to indicate the transmitter needs
recharging.
• Intensity Dial: Rotate the dial to adjust the level of vibration or static shock stimulation
from 0 to 100.
• Toggle Switch (Dog Selection): Switches control between Collar Receiver 1 or Collar
Receiver 2 (Dog 1 or Dog 2).
• Vibration Button: Delivers vibration to a Collar Receiver, depending on the position of
the Toggle Switch.
• Stimulation Button: Delivers electronic pulse stimulation to a Collar Receiver, depending
on the position of the Toggle Switch.
• Sound Button: Delivers a sound to a Collar Receiver, depending on the position of the
Toggle Switch.
• Charging Port: Charges the battery of the Remote Transmitter when connected to a
power source.
Collar Receiver
• ON/OFF Button: Powers on/off the Collar Receiver and used for Pairing or
Toggle
Switch
Charging Port