JYK Model : ST15002-1 Suitcase Bluetooth Turntable with USB-to-PC Connection
PART OF LOCATIONS TURNTABLE PARTS 1. Turntable Platter 2. Turntable Shaft 3. 45 RPM Adaptor 4. Lift Lever 5. Tone Arm Clip/Rest 6. 3.5mm LINE IN Jack 7. Speed Control Selection 8. Function Selection Knob 9. Auto & Manual Stop Control Switch 10. Charging Battery led light indicator 11. Tone arm 12. Power/Volume Control Knob 13. Power and Function Led Indicator 14. Stylus(Needle) Cartridge 15. Lock 16. Handle 17. Built-in Speaker 18. RCA output jack 19. USB Port. 20.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the back enclosure of the apparatus. The Rating Plate is located at the back enclose of the apparatus. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4.
17. 18. 19. 20. 21. 22. 23. Use replacement part as specified by the manufacturer. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
CONNECTING THE USB CABLE 1. To encode music from your records or from the Line in line, connect the USB Port of the Turntable to a suitable USB port on your computer via the USB cable provided. 2. Please refer to CONNECTING TO A COMPUTER FOR RECORDING section of this manual for detail. PHONO OPERATION Please Note - Before Use - Remove the stylus protector. - Be sure that the tone arm is unlocked and free to move from the tone arm rest prior to operating. Lock the tone arm in place again when not in use.
4. Select the Bluetooth pairing name, to connect the unit. Once connected, the blue LED light will stop flashing. 5. You are now connected to your external device via Bluetooth. 6. Rotate the VOLUME CONTROL KNOB to adjust the sound level. AUXILIARY INPUT Connecting external audio devices like MP3 players, CD players and older, non-dock able iPods (except iPod shuffle 3rd gen) so you can listen to your external source through the speakers of this system. 1. Use an audio cable (not included) with one 3.
4. 5. Open “Windows” folder and select “Audacity 2.0.3(Windows 2000, XP, Vista, 7, 8)”. Double click Audacity set up icon with file name “audacity-win-2.0.3” to install the Audacity software according to the instruction, read license agreements of Audacity before installation. NOTE: Free software (AUDACITY) licensed under the GNU general public license (GPL). More information as well as open source code can be found on the provided CD or on the website at: http://audacity.sourceforge.
4. In the Sound Recording field, click the pull down menu to select “ USB PnP Audio Device ” as Default device of sound recording. 5. Click the Volume button under the Sound recording tab to open ”Recording Control“ interface; 6. Adjust the line in volume to a level without distortion. You can play a record on the turntable and use the Sound Recorder to record a short clip of music for testing. The sound wave will show on the interface screen when recording.
3. Click “Preferences” at the bottom of the Edit menu, you can set the Devices, Quality, and various settings here.
Note: If you couldn't find the "Microphone (USB Audio Controller or USB Audio Codec)" or “Microphone array to USB pnp audio device/controller” from the Device list, close the Audacity Software, make sure the usb Turntable is connected, then re-start Audacity Software and try again. 4. Adjust the input and output volume by sliding the Input and Output Volume bars. Output Volume Input Volume 5. Click the record button to start recording, left and right tracks will show on your computer screen.
1. Click File menu and move down to “Export” to convert the file to WAV format or MP3 format. 2. Click on WAV or MP3 format you want to save the music as in pull down menu of “Save as type” field, and you will be asked for the file name of your recorded music NOTE: Audacity does not export MP3 files directly.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution when cleaning and wiping the plastic parts. If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinet. If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit.
SPECIFICATION Specifications AMPLIFIER section Output power……………………………………………..… Frequency response……………………………………… 0.4W + 0.4W 60 TO 20,000 Hz (+3, -2dB) PHONOGRAPH section Motor……………………………………………………….…… Drive system…………………………………………………. Speeds………………………………………………………….. Wow and flutter………………………………………………. S/N ratio……………………………………………………….. Cartridge type……………………………………………….. Stylus……………………………………………………………. Output level………………………………………………….. DC servo motor Belt drive 33-1/3 rpm, 45 rpm and 78 rpm Less than 0.
