User's Manual

6
BLUETOOTH OPERATION
An external device with Bluetooth Connectivity can be wirelessly connected to this
apparatus using the Bluetooth function.
1. Power ON the unit by turning the VOLUME CONTROL KNOB clockwise. The red
LED will light to show that the turntable is turned ON.
2. Turn the FUNCTION KNOB to the BT (Bluetooth ) position, the blue LED light will
begin to flash.
3. Turn your external device’s Bluetooth Setting ON. Wait a moment, then look for
the Bluetooth pairing name “Vintage Turntable”
4. Select the Bluetooth pairing name, to connect the unit. Once connected, the
blue LED light will stop flashing.
5. You are now connected to your external device via Bluetooth!
6. Rotate the VOLUME CONTROL KNOB to adjust the sound level.
An external (auxiliary) audio source (i.e. personal CD/MP3 Player/Mobile phone or
AUX-IN OPERATION
computer) can be connected to this apparatus via the LINE-IN JACK.
1. Plug a detachable Aux-In Cable (not provided) into the LINE-IN socket on the
function panel of the apparatus.
2. Turn the FUNCTION KNOB to the LINE-IN position.
3. Plug the other end of the Aux Cable into the Headphone or Line Out socket of
your External Source.
4. Power ON the unit by turning the VOLUME CONTROL KNOB clockwise. The red
LED will light to show that the turntable is turned ON.
5. Rotate the VOLUME CONTROL KNOB to adjust the sound level.
HEADPHONE OPERATION
Plug the headphone jack into the headphone port on the function panel to listen to
the record. The built-in speaker will stop playing once the headphones are
plugged in.
NOTE: For best performance and product maintenance, unplug the turntable when
not in use.
R