JYK 3-Speed Vintage Bluetooth Turntable Model: ST14097-1 Instruction Manual PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE.
CONTENTS SAFETY INSTRUCTIONS ................................................................................22 SPECIFICATIONS ............................................................................................33 TURNTABLE LAYOUT...................................................................................... 4 TURNTABLE OPERATION ...............................................................................55 POWER SUPPLY ......................................................................
SAFETY INSTRUCTIONS 1. Read these instructions - All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions - The safety and operating instructions should be retained for future reference. 3. Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions - All operating and use instructions should be followed. 5.
21. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 22. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead within an equilateral triangle is intended to alert the user to the presence of uninsulated 揹angerous voltage?within the product?s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
TURNTABLE LAYOUT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
TURNTABLE OPERATION POWER SUPPLY Insert the adaptor plug into the DC IN jack on the rear of the unit, then connect the AC/DC adaptor (5V, 1A / AC100-240V, 50-60Hz) to a AC/DC wall outlet. BASIC OPERATION 1. Lift the BUCKLE on the front of the turntable and open the lid. 2. Power on the unit by turning the VOLUME CONTROL KNOB clockwise. The red LED will light to show that the turntable is turned on. Turn the FUNCTION KNOB to the PHONO position. NOTE: LED will be blue if switched on in Bluetooth mode. 3.
BLUETOOTH OPERATION An external device with Bluetooth Connectivity can be wirelessly connected to this apparatus using the Bluetooth function. 1. Power ON the unit by turning the VOLUME CONTROL KNOB clockwise. The red LED will light to show that the turntable is turned ON. 2. Turn the FUNCTION KNOB to the BT (Bluetooth ) position, the blue LED light will begin to flash. 3. Turn your external device’s Bluetooth Setting ON. Wait a moment, then look for the Bluetooth pairing name “Vintage Turntable” 4.
FCC STATEMENT Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
