User's Manual

Mobile phone holder: Pull the phone holder out of the slide,

open the stand, and then insert the phone into the holder.

Microphone

Operating Manual

Bluetooth connection:

Long press on / off “ ” button, you will hear “Power On”, the

microphone is in Bluetooth mode. Turn on the Bluetooth device

(such as mobile phone) and select “SO BT Karaoke Microphone”,

when you hear “Bluetooth Connected”, the pairing is successful.

Bluetooth Pairing:

1. If you want to pair, you need two Snap-on® Bluetooth

Karaoke Microphones.

2. Make sure both microphones are disconnected from any

Bluetooth devices.

3. Turn on the two microphones, rapidly double-click the Mode

button “ ” of one microphone after entering the Bluetooth mode.

The microphone will sound a “Dong” tone to indicate that another

microphone is being connected, this can take up to 30 seconds.

They are now paired successfully.

4. Open the device’s Bluetooth settings, search the microphone’s

pairing name and connect, you can connect both the paired

microphones within your device’s Bluetooth settings.

5. To disconnect the pairing, turn off Bluetooth mode on device

then double-click mode button “ ” and you will hear a “DingDong”.

TransFlash (TF) Card Socket: To play your own MP3 recorded

music insert a TF Card with downloaded ﬁles into port. You can

switch between Bluetooth mode and TF mode by short pressing

the mode button “ ” on microphone.