User's Manual Part 1

3.2 Installing Mini-PCIE extended devices

At the rear panel of MI-H55 is a Mini-PCIE extended slot, to which the user

can connected WIFI module and Bluetooth module etc.

4. Install expansion slot card

Note:

The user should notice that all sockets are marked with PIN1. The mark “#”

indicates the ex-factory default values.

4.1. SATA1/SATA2/SATA3/SATA4 (Serial ATA flat-cable sockets)

Serial ATA sockets can reach a transmission speed of 300MB/s, and you can

connect your Serial ATA device to this socket.

4.2. CPU_FAN1 (CPU FAN socket)

This receptacle can be used for connecting CPU/system fan. Its pins are

defined below. The user shall make sure the fan is conforming.

Definition

GND

TXP

TXN

GND

RXN

RXP

GND

12V

SIGNAL

123