User's Manual

(including wrong installation of operating system and driver). Check whether the
version of your DirectX is conforming.
9. Sound disappeared abruptly. Check whether the connection between power
amplifier and speaker are reliable, and double click the volume icon to see whether
the audio part is set as “mute”.
10. Can’t access to Internet. Check whether the network system is properly connected,
or the wireless router runs normally. Check whether the driver for the network
equipment is properly installed and the related parameters are correctly set. Finally,
make sure the ISP service is still valid.
11. System can’t access the information on hard disk. Check whether the hard disk is
infected by virus. Note whether the hard disk is detected during the self-detection
process.
12. Blue screen and system crash. Check whether the system is infected by virus. If the
problem still exists, it is recommended that the operating system be re-installed.
13. PC can’t recognize USB devices or USB devices can’t run normally. Check whether
these devices are properly installed (or the power is turned on), or the latest version
of the drive for the device is installed.
14. For some models, when you first install the operating system, after installed display
driver, the display resolution settings should be:
After settings are finished securely and tightly, turn your monitor ON and press the power
button on your computer. The Power indicated LED will light and please wait until the
operating system loads automatically.
Note:
Illustrations are for reference only. The ports and their locations, and the chassis color vary
with different models.
Always remove the AC power by unplugging the power cord from the power outlet before
installing or other hardware components.
Before using the product, please verify that all cables and power connectors of your
hardware components are connected.
Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.