User's Manual

Ⅳ. Power Supply and Maintenance
1. Power Supply
In order to avoid personal injury and ensure the normal operation of the product, please
make sure the AC power you provide conforms to the specifications described on the
sign at the back of the adapter. Use three-core receptacle and reliable grounding. In
addition, you should also make sure the voltage from your local power matches the
respective rated value of the monitor and other external equipment.
It is recommended the attached adapter be used. If the attached adapter can’t be used
under some special circumstances, you must use an adapter with the same
specification.
Input Characteristics
The range of input voltage is from 90Vac to 264Vac with a single phase.
Min.
Rating
Max.
Input Voltage
90Vac
100Vac～240Vac
264Vac
Input Frequency
47Hz
60Hz/50Hz
63Hz
Output Characteristics
Static Output Characteristics <Vo & R+N>
Output
Rated Load
Output Range
Ripple & Noise
Remark
Rating
Min.
Max.
+5.0V
0A
3A
±5%
350mVp-p
2. Maintenance
As a high-tech product with sophisticated structure, Giada Mini PCs needs to be
maintained properly. Misuse or rough handling may result in damage or system failure.
 Body
Please do not remove the protective film on the surface before using, and prevent sharp
objects from scratching on it. Make sure the power supply to the host is cut off before
cleaning the body. Never use wet cloth for cleaning. Otherwise, water drops or other
conductive liquid may go into the host. To clean the base of the host, you should first
remove the host. At the time, you should put the host in a safe place where is won’t slide
down or fall onto the ground.
 Handling
This product is an ultra-light PC, never place the product at the edge of the table.
Otherwise, it may fall on the ground and be damaged. Always check the peripheral
equipment and the connection cables to see whether they are properly arranged, so that
people might not be stumbled by the wire or equipment and equipment not damaged.
 Radiation
Radiation is of great significance for PCs. Please place the product in a proper position.
Never block the air inlet and air outlet that are used for ventilation. Do not place the
product onto the bed, sofa or other soft objects for use. Otherwise, the vents might be
blocked and system halted because of the overheating.
 Interfaces
Never use other objects to jam the interfaces on the host, nor use sharp objects to