Product Info

Version Number: 1.0 Issue date:2020.04.10
14
2 ) Operate on the device
a) Press the Stop/Start button. The pump begins to inflate the cuff. In the display, the
increasing cuff pressure is continually displayed.
b) After automatically reaching an individual pressure, the pump stops and the pressure slowly
falls. The cuff pressure is displayed during the measurement.
c) When the device has detected your pulse, the heart symbol in the display begins to blink.
d) When the measurement has been concluded, the measured systolic and diastolic blood
pressure values, as well as the pulse will be displayed.
e) The measurement results are displayed until you switch the device off. If no button is
pressed for 60seconds, the device switches off automatically.
f) Cuff self-checking symbol (√×)
The cuff correct symbol(√) will be displayed if the cuff position is correct, otherwise the wrong
symbol(×) will be displayed. Please check again the cuff if the wrong symbol(×) is displayed.
g) Movement error symbol (
)
The Movement Error Symbol (
) is displayed if you move your body during the
measurement. Please remove the cuff, and wait 2-3 minutes. Reapply the cuff and take
another measurement.
Recommended Use Methods
1. recommendation that the PATIENT relax as much as possible and not talk during the
measurement PROCEDURE
2. recommendation that 5 min should elapse before the first reading is taken
3. any reading can be affected by the measurement site, the position of the PATIENT,
exercise, or the PATIENT’S physiologic condition
4. performance of the AUTOMATED SPHYGMOMANOMETER can be affected by extremes
of temperature, humidity and altitude
5. To stop the inflation or measurement, push the START/STOP button. The
monitor will stop inflating, start deflating, and will turn off.
App 09 App 10
App
11