Product Info

Version Number: 1.0 Issue date:2020.04.10

A. Setting the Users

Press the Setting button and then you can set the A/B user by shifting the A/B user button

B. Setting the Year/Month&Date/Time/Volume

Long press the Setting button for more than 3s, and then you can start to set.

Setting the Year:

Initial year is 2018, when the year display is flashing, press the memory button, the year will

increase by I year each, hold the memory button and it will increase continuously 1 by 1, until

2049, and then rollover to 2018, once the year Setting is OK, press SET button to confirm.

Setting Month/Date:

Initial Month/Date is 1/01, when the Month display is flashing, press the memory button, the

month will increase by 1, press SET button to confirm, and do in the same way to set the date.

Press SET button to confirm.

Setting Time :

When the hour display is flashing, press the memory button, the hour will increase by 1, press

SET button to confirm, and do in the same way to set the minute. Press SET button to confirm.

Setting Volume:

When display with SP is flashing, press memory button to switch volume 1, volume 2, volume

3 or OFF. Press SET button to confirm.

C. Record Delete

When you checking the memory data, long press memory to delete existing user

measurement data.

Note:

You can’t delete all measurement record from the monitor storage at one time, if you decide to

delete the all record, please keep the record in another way, in case you need it some days

later. Take the battery out won’t lead to a record missing.

4.2. Cuff tube connection

Insert the cuff tube into the opening on the left side of the monitor indicated by the drawing of a

cuff.

5. Measurement Procedure

Note: You should always be seated and calm before and during measurement.

5.1. Before measurement:

• Avoid eating and smoking as well as all forms of exertion directly before measurement.

These factors influence the measurement result. Find time to relax by sitting in an armchair in

a quiet atmosphere for about ten minutes before taking a measurement.

• Remove any garment that fits closely to your upper arm.

• Always measure on the same arm (normally left).

• Always compare measurements taken at the same time of day, since blood pressure

changes during the course of the day, as much as 20-40 mmHg.