User's Manual

Version Number: 1.0

1. Talking function 2.One user: 120 sets memory 3.Irregular heartbeat checking

4. Average value function 5. Battery display 6. Auto power-off

7. Built-in chargeable lithium battery 10.Volume adjustment 11. Date/time display

12. Cuff and main unit are integrated as one part 13. Bluetooth function

Note: Arm circumference should be measured with a measuring tape in the middle of the

relaxed upper arm. Do not force cuff connection into the opening. Make sure the cuff

connection is not pushed into the AC adapter port.

4. Using your Monitor for the First Time sing your Monitor for t

4.1. Battery Power checking

The battery is built-in chargeable Lithium battery.

Press the “Power ON/OFF ” button, if the

symbol is flickering and the device speaks

“battery low power, please recharge it”. It means the battery power is low and need to be

recharged. The power supply should be AC 5/1A.

When the

symbol appears，it means the battery power is fully recharged. It can be used

normally. If battery is not fully recharged， the

symbol will flicker.

4.2. System Settings

After the battery is fully recharged, holding the START/STOP button more than 3 seconds to

ON/OFF. Some functions can be set before use this monitor：

a. Start/Stop

Press the Start/Stop button one time. The device will start measurement. Press the Start/Stop

button again, the measurement will stop.

b. Setting the Volume

Press and hold the START/STOP button, When display with SP is flashing, press memory

button to switch volume 1, volume 2, volume 3 or OFF. Press START/STOP button to confirm.

c. Assessment of the memory record

Press memory button, it will seek for the memory record.

d. Delete record

When you checking the memory data, long press memory to delete existing user

measurement data.

Note:

You can’t delete all measurement record from the monitor storage at one time, if you decide to

delete the all record, please keep the record in another way, in case you need it some days

later. Take the battery out won’t lead to a record missing.