薉俒䧭ⱃ勞餘 㼓⯕ HꜤ晜紺ⰻ곜兜鸑 H⛼ⱗ 紺㽯㼄 NN Fully Automatic Upper Arm Blood Pressure Monitor Model Number: B02T USER’S MANUAL CONTACT INFORMATION: Digital Blood Pressure Monitor B02T is legal manufactured by: Company name: Shenzhen Jamr Technology Co., Ltd. Address: 2nd Floor, A-building, No.2 Guiyuan Road, Guihua community, Guanlan town, Longhua new district, 518100 Shenzhen, PEOPLE’S REPUBLIC OF CHINA Website: www.jiemeirui.
A Special Thank You... Thank you for choosing a B02T blood pressure instrument. We're proud of the care and quality that goes into the manufacture of each and every item that bears our name. Only the finest materials are used to assure you of a timeless instrument designed for optimum performance. You'll quickly appreciate the results, for you now own one of the finest digital blood pressure instruments that money can buy.
CONTENTS 1.Introduction and Intended Use...........................................................3 2.Important Information on Blood Pressure and its Measurement....... 6 3. Components of Your Blood Pressure Monitor..................................8 4. Using Your Monitor for the First Time.............................................. 10 5.Measurement Procedure.................................................................. 12 1.Introduction and Intended Use This manual is for B02T models.
NOTE! Warning: No modification of this equipment is allowed. = or electromagnetic fields in the direct vicinity of the device (e.g. mobile telephones, microwave ovens) during use. These can lead to erratic results. > ? occur, refer to local distributor or the manufacturer.
2.Important Information on Blood Pressure and its Measurement There are six grids in the display of device. Please refer to the picture-01-01. Different grids represent different interval scales of WHO. 2.1. How does high or low blood pressure arise? Your level of blood pressure is determined in the circulatory center of the brain and adjusts to a variety of situations through feedback from the nervous system.
2.3. What can be done if regular high or low values are obtained? 1) Consult your doctor. 2)Increased blood pressure values (various forms of hypertension) are associated with considerable health risks over time. Arterial blood vessels in your body are endangered due to constriction caused by deposits in the vessel walls (Arteriosclerosis). A deficient supply of blood to important organs (heart, brain, muscles) can result from arteriosclerosis.
4. Using your Monitor for the First Time 4.1 Activating the pre-installed batteries Battery Installation Use only 1.5V “AAA” alkaline batteries with this device. 1. Press the hook on the bottom of the battery cover and lift the cover off in the direction of the arrow. 2. Install 4 “AAA” size batteries so the + (positive) and (negative) polarities match the polarities of the battery compartment, replace the battery cover.Make sure that the battery cover is securely in position.
5. Measurement Procedure Note: You should always be seated and calm before and during measurement. 5.1. Before measurement: = ! X measurement. These factors influence the measurement result. Find time to relax by sitting in an armchair in a quiet atmosphere for about ten minutes before taking a measurement.
5.4. Measure Procedure c)Connect Bluetooth Refer to picture-07 The monitor is designed to take measurements and store the measurement values in memory for two people using User ID A and User ID B. 1. Sit comfortably in a chair with your feet flat on the floor. 2. Select your User ID (A or B). Stretch your arm forward on the desk and keep relaxing, make sure the palm of hand is upturned. Make sure arm is in correct position, to avoid body movement. Sit still and do not talk or move during the measurement.
e)Checking the measurement 2 ) Operate on the device In the frame of home interface, it will show the last measurement as picture App 09. You can check the measurements with detail by clicking the History button as picture App 10 and app 11 . a) Press the START/STOP button. The pump begins to inflate the cuff. In the display, the increasing cuff pressure is continually displayed. b) After automatically reaching an individual pressure, the pump stops and the pressure slowly falls.
Recommended Use Methods 1.Recommendation that the PATIENT relax as much as possible and not talk during the measurement PROCEDURE 2.Recommendation that 5 min should elapse before the first reading is taken 3.Any reading can be affected by the measurement site, the position of the PATIENT, exercise, or the PATIENT’S physiologic condition 4.Performance of the AUTOMATED SPHYGMOMANOMETER can be affected by extremes of temperature, humidity and altitude 5.
Put up Fragile Keep dry Avoid the sun Handle gently Temperature range No Sterilize requirement Not category AP / APG equipment Mode of operation: continuous 5.7. Memory SYMBOL DESCRIPTIONS The following symbols may appear in this manual, on the Digital Blood Pressure Monitor B02T, or on it's accessories. Some of the symbols represent standards and compliances associated with the Digital Blood Pressure Monitor B02T and its use.
The battery compartment is located on the back side of the unit. a) Remove cover from the bottom plate, as illustrated below picture-08 b) Insert the batteries (4 x size AAA ). Always use AAA long life batteries or alkaline 1.5v batteries. c) The memory retains all values although date and time must be reset - the year number therefore flashes automatically after the batteries are replaced. d) To set date and time, follow the procedure described in Section 4.2.
7. Warranty Your blood pressure monitor is guaranteed for 1 year against manufacturers’ defects for the original purchaser only, from date of purchase. The warranty does not apply to damage caused by improper handling, accidents, professional use, not following the operating instructions or alterations made to the instrument by third parties. Warranty only applies to the instrument. All accessories including the cuff are guaranteed for one year, USB charging cable is not included.
Guidance and manufacture’s declaration – electromagnetic immunity The device is intended for use in the electromagnetic environment specified below. The customer or the user of device should assure that it is used in such an environment.
Guidance and manufacture’s declaration – electromagnetic emission The device is intended for use in the electromagnetic environment specified below. The customer of the user of the device should assure that it is used in such an environment.
FCC Statement 11. Warranty Card Faults Reasons What is Repaired The First Repair Date: Faults Repaired by: Reasons The Second Repair Date: Repaired by: What is Repaired This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.